Bosch Rexroth EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN 2.2kW Frequency Converter
Product Overview and Design Philosophy
The Bosch Rexroth EFC5610 series represents a versatile, compact line of variable frequency drives designed to deliver dependable speed and torque control for three-phase induction motors across diverse industrial applications. The EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN model provides a rated power output of 2.2 kW, combining straightforward commissioning with advanced motor control algorithms in a slim, space-saving chassis.
Engineered to bridge the gap between basic frequency inverters and high-end servo drives, the EFC5610 supports both volts-per-hertz (V/f) control and sensorless vector control. This flexibility allows machine builders to achieve strong low-speed torque, rapid dynamic response, and smooth operation across fans, pumps, conveyors, mixers, and general-purpose production machinery without unnecessary system complexity.
Type Code Breakdown: EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN
Each character group in the Bosch Rexroth model code specifies exact electrical ratings, enclosure characteristics, and integrated hardware features for the 2.2 kW unit.
Series Identification (EFC5610): Denotes the EFC5610 general-purpose frequency converter platform featuring an integrated LCD operating panel, potentiometer dial, and multi-language parameter menu for intuitive local setup and diagnostics.
Rated Power Class (2K20): Indicates a nominal motor power rating of 2.2 kW, tailored for light-to-medium industrial drive loads requiring steady continuous output and overload resilience during acceleration.
Mains Supply Voltage (3P4): Specifies a three-phase AC input voltage class of 380 V to 480 V (50/60 Hz), making the converter compatible with standard international industrial power grids.
EMC and Brake Configuration (MDA): Incorporates an integrated Category C2 EMC filter to suppress electromagnetic interference in commercial and industrial environments, alongside a built-in braking transistor (brake chopper) for connecting an external braking resistor when handling regenerative loads.
Control and I/O Architecture (7P-NNNNN): Defines the standard control terminal block and interface configuration with programmable digital inputs, analog inputs/outputs, relay outputs, and RS485 serial communication capability (supporting Modbus RTU) without specialized expansion cards.
Variant and Firmware Options (L1NN): Identifies the standard factory firmware and localized configuration options suited to general industrial drive deployments.
Technical Specifications and Electrical Performance
The EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN is built to maintain stable motor performance under fluctuating load profiles and ambient industrial conditions. Its thermal design and power electronics support high switching frequencies for quiet motor operation and reduced harmonic heating.
| Parameter | Specification |
|---|---|
| Product Family | Bosch Rexroth EFC5610 Frequency Converter |
| Rated Motor Power | 2.2 kW |
| Input Voltage | 3-Phase AC 380 V to 480 V (-15% / +10%), 50/60 Hz |
| Output Frequency Range | 0 Hz to 599 Hz |
| Control Modes | V/f Characteristic Control, Sensorless Vector Control |
| Integrated EMC Filter | Category C2 Built-In |
| Brake Chopper | Integrated Braking Transistor |
| Degree of Protection | IP20 |
With an output frequency range extending up to 599 Hz, the converter can drive both standard 50/60 Hz asynchronous motors and high-speed spindle or centrifugal applications. Built-in protection functions monitor overcurrent, overvoltage, undervoltage, overheating, and phase loss to safeguard both the drive and the connected motor.
Industrial Applications and System Integration
In industrial automation, the EFC5610-2K20-3P4-MDA-7P-NNNNN-L1NN excels in conveyor transport lines, centrifugal and positive-displacement pumps, HVAC blowers, textile equipment, and woodworking machinery. The integrated brake chopper allows controlled deceleration of high-inertia loads without tripping on DC bus overvoltage.
Parameter cloning via the removable control panel or PC engineering software speeds up multi-machine commissioning, while standard Modbus RTU support enables straightforward integration with PLCs and supervisory control systems.




