GE DS200SNPAH1A SNP Protocol Interface Daughterboard

GE DS200SNPAH1A SNP Protocol Interface Daughterboard

Part Number DS200SNPAH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200SNPAH1A is a Protocol Interface Daughter Board manufactured and designed by General Electric. The SNPA connects the DSPC board and the Series 90-30 PLC via RS-232C and isolated RS-484 serial communication. This PLC communicates via a Series Ninety Protocol (SNP) bus. 

The SNPA is a DSPC daughterboard that is not found in LCIs equipped with Innovation Series Controllers. Functional description It is used in conjunction with the DS200DSPC Digital Signal Processor Control Motherboard. The board is installed in the VMEbus rack with the SPC and the ADMA Analog-to-Digital Module. This model's primary function is to provide isolated RS-484 and RS-232C communication between the attached DSPC board and the Series 90-30 PLC model. The control cabinet is also included with the SNPA model. DS200SNPAH1A Features The LCI with Innovation Series Controller differs greatly from the PLC-based LCI Controller in that it eliminates the need for it. This model will never be used with the LCIs found in the Innovation Series Controllers. 

The communications bus on the board is of the Series Ninety Protocol (SNP) variety. The SNPA daughterboard is not required by the LCI with an Innovation Series Controller, whereas the SNPA board is required by the LCI with a PLC. On the SNPA board, there are two protocol selections: 1, which allows the Series 90 Protocol to be enabled, and 0, which disables the board. The GEI-100226 User's Guide, which is a part-specific manual for the SNPA, is the best manual to use with this board.

This DS200SNPAH1A SNP Protocol Interface Daughterboard was manufactured, as referenced above in our brief functional product description, by General Electric, specifically for the LS2100 Series. The LS2100 Series or the Load Commutated Inverter Series is a specialized General Electric product series specializing in the control of synchronous-style motors in automated drive assemblies across a range of different applicable speeds. Two different functional applications or sections exist to the LCI, as specified in the above-attached originally-printed instructional manual materials. These two sections are both power conversion and control. Before making any ultimate purchase decision on this DS200SNPAH1A SNP Protocol Interface Daughterboard LS2100 Series product, it is critical to understand that the LS2100 Series may not be surrounded by a plethora of manufacturer support given the fact that it is truthfully a now-obsolete product series that was discontinued due to a GE-identified full-series obsolescence at some point since its original rollout in the later1990s.

Hardware Tips and Specifications

General Electric LS2100 Series Model DS200SNPAH1A is an SNP Protocol Interface Daughterboard used with the DS200DSPC Digital Signal Processor Control Motherboard. The board is mounted in the VMEbus rack alongside the SPC as well as the DS200ADMA Analog-to-Digital Module. The primary function of this model is to provide an isolated RS-484 and RS-232C communication between the attached DSPC board along with the Series 90-30 PLC model. The DS200SNPAH1A model is configured with the control cabinet as well. The LCI with Innovation Series Controller is vastly different from the PLC-based LCI Controller as it diminished the need for this controller. This model will under no circumstances be used with the LCIs within the Innovation Series Controllers. Several other products exist within this DS200SNPAH1A SNP Protocol Interface Daughterboard device's greater VMEbus Rack mounting assembly, each with their own various specialized functions as again detailed in above-attached instructional manuals. Many of this device's related daughterboards may additionally be available for purchase and repair here, including the:

Greater DS200DSPC Board

DS200ADMA Board

DS200FCGD Board

DS200FCGE Board

DS200VPBL Board

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider