DS2020FECNRX005A | General Electric Field Exciter Module

DS2020FECNRX005A | General Electric Field Exciter Module

Product Description P/N: DS2020FECNRX005A DESCRIPTION / SPECIFICATIONS Description The DS2020FECNRX005A Field Exciter Module from the Mark V Series was originally manufactured by General Electric. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category Power Supplies Part Number DS2020FECNRX005A Subcategory Power Supply Series Mark V, DC2000 Adjustable Speed Drives Product Type Field Exciter Module Features 24A NRX and 5A Shunt Current Rating 5A Jumpers JP1 - JP7 Terminal Blocks 2 Information About DS2020FECNRX005A The General Electric Field Exciter Board DS2020FECNRX005A features 7 jumpers (JP1 through JP7) and 2 terminal blocks, each with 3 terminals. It also includes several prong-type connectors, such as P1C1, P1G1, P2G1, and N1CI, which are metal prongs covered by corresponding socket connectors. These connectors are attached to components on the board with standoffs. 

 When connecting cables, first secure the board to the unit using plastic screws, then attach the cables. The board鈥檚 instructional manual provides detailed installation guidelines for both cable connectors and fuses. It is advisable to keep spare fuses on hand in case of failure. If replacing a defective board, record the IDs of the connectors and the jumper configurations from the old board. Transfer the jumpers to the new board without bending the pins, ensuring they cover the same pins as on the original board. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions.

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.