GE DS215TCCBG3AZZ01A Circuit Board and Firmware

GE DS215TCCBG3AZZ01A Circuit Board and Firmware

Part Number DS215TCCBG3AZZ01A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockThe DS215TCCBG1BZZ01A is a Common Extended Analog I/O Board (TCCB) produced by General Electric as part of the Speedtronic Mark V LM system. Its primary function is to serve as an indication, communication, and alarming device, and it is located in location 3 of the TC2000 C core. It is labeled Turbine Control C Micro Application Card B and has the capability of providing various values to the C core such as RTDs, milliamp inputs, and milliamp and RTD filtering. It has a variety of connectors, including a 2PL connector that distributes power from the TVPS board in the R5 core. It has a 3PL connector that connects the data bus between the STCA, TCCA, and TCCB boards, as well as a JMP connector that can provide signals from the TCEB board. It is only designed to work in an indoor environment. It can be installed in the cabinet within an I/O control rack, taking up a single slot.

ABOUT THE DS215TCCBG3AZZ01A

The DS215TCCBG3AZZ01A is a GE Common Extended Analog I/O Board (TCCB) originally manufactured, as described above, by General Electric, for insertion in their Mark V Turbine Control System Series. As evidenced by its full extended series name, the Mark V Series that this DS215TCCBG3AZZ01A printed circuit board product offering belongs to has specific applications in the management and control systems of compatible and popular wind, steam, or gas turbine automated drive assemblies. This DS215TCCBG3AZZ01A printed circuit board or PCB for short's greater Mark V Series has to be considered a legacy product series, as it has been discontinued due to obsolescence in one of the many years following its initial release. With this being true, the Mark V Turbine Control System Series is still something of a highly sought-after General Electric product series, as it exists as one of the final General Electric product series to make use of the company's patented Speedtronic control system technology first introduced with the release of the Mark I Series in the mid to later 1960s. This DS215TCCBG3AZZ01A printed circuit board product offering was not the originally-produced device of its specific Mark V Series functionality; that would be the DS215TCCBG3 parent printed circuit board missing this DS215TCCBG3AZZ01A PCB's A-rated functional revision and optional software package.

Hardware Tips and Specifications

The software for DS215TCCBG3AZZ01A can be configured. The TCCB card is in location 3 on the TC2000 core. It is specifically labeled “Turbine Control Micro Application Card B” and it is only meant to handle alarm, communication, and indication. When configuring the DS215TCCBG3AZZ01A, it has the ability to fully define the core functions RTDs, milliamp inputs, and the filtering of those RTDs and milliamp inputs. The DS215TCCBG3AZZ01A has four main jumpers that provide a few different functions. Jumper J2 is normally enabled but when it is disabled it disables the serial RS-232 port. The BJ1, BJ2, and BJ3 jumpers should all be inserted to provide normal operation and should be in the out position to test the card. When they are in the in position, they enable the oscillator. As with any Mark V Turbine Control System Series product available here, this DS215TCCBG3AZZ01A printed circuit board is not available in internet-ready research materials; given its attribution to a now-obsolete General Electric Legacy product series. With this being the case, the General Electric-formulated DS215TCCBG3AZZ01A functional product number itself can be considered a strong primary source of important DS215TCCBG3AZZ01A Board information; coding for different details in a series of consecutive functional naming chunks. For example, the DS215TCCBG3AZZ01A functional product number begins with the dual-functional DS215 series tag delegating this DS215TCCBG3AZZ01A PCB's special Mark V Series assembly and its domestic original manufacture location. Some of the other specifications revealed through the DS215TCCBG3AZZ01A functional product number itself include this DS215TCCBG3AZZ01A PCB's:

TCCB functional product abbreviation

Group three Mark V Series product grouping

Normal PCB coating style

A-rated functional product revision

Optional software package

Our Main Brands

· - ABB Advant-800xA，Advant OCS，Bailey Infi 90 and Net 90，H&B Freelance 2000，DSQC Robots，IGCT / IGBT

· - GE General Electric Field Control, Genius I/O, QuickPanel, RX3i PacSystem, Series 90, Series 90, Series VersaMax

· - Allen Bradley Allen-Bradley SLC500, MicroLogix, CompactLogix, ControlLogix, PLC-5, Panel View,

· - Bently Nevada 3300 System, 3500 System

· - Honeywell 7800 Series, FSC, IPC, Mxopen, TDC 2000, TDC 3000, Experion PKS(C200,C300)

· - Yokogawa Centum CS - Centum VP, Centum XL - micro XL, FA-M3, ProSafe-PLC

· - Ovation, Foxboro, EPRO, Emerson DeltaV, Fuji, Siemens, HIMA, Prosoft, Invensys Triconex, ICS TRIPLEX, Woodward, Bachmann, Schneider