DS3800DMFA1B1B | General Electric Motor Field Regulator Board

DS3800DMFA1B1B | General Electric Motor Field Regulator Board

Product Description P/N: DS3800DMFA1B1B DESCRIPTION / SPECIFICATIONS Description The DS3800DMFA1B1B General Electric Motor Field Regulator Board is crucial for controlling motor field excitation in industrial systems. It ensures precise regulation of field currents, enhancing motor performance and stability. 

Designed for reliability and durability, it supports efficient operation in demanding environments. Technical Specifications Condition New / Never Used Surplus Brand General Electric Category PLCs/Machine Control Part Number DS3800DMFA1B1B Subcategory PC Board PLC/Add-On Board Type Motor Field Regulator Board Series Mark IV Board Type Control / Regulator Board Operating Temperature 0掳C to +60掳C Storage Temperature -20掳C to +85掳C Humidity Range 5% to 95% non-condensing Information About DS3800DMFA1B1B The GE Motor Field Regulator Board DS3800DMFA1B1B features ten terminals for connecting additional components. It is equipped with ten trimmer resistors, one 20-pin ribbon cable, multiple jumpers, and eleven resistors, each labeled with an "R" prefix followed by a numeric identifier (e.g., R11, R16, R13). These resistors have varying resistances and are used to achieve specific processing outcomes. 

 To add or modify components, use the terminals on the board, each linked to a particular circuit. Refer to the original board's installation instructions for details on terminal functions and associated circuits. Only a trained technician should handle component additions or modifications to avoid damaging the board. When working with the terminals, use a flat-blade screwdriver to loosen the retention screw without removing it. Insert the lead wire under the screw and tighten it. Components are not permanently embedded, so they can be easily swapped by loosening the screws, removing the old component, and installing a new one. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

l The technical specifications and typical applications of the product system must be strictly observed.

l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

Hazardous area conditions must be instructed and explained to these personnel.

l Unauthorised modifications: No modifications or structural changes may be made to the product system.

l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

l Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.