GE DS3800NPSR POWER SUPPLY CARD

GE DS3800NPSR POWER SUPPLY CARD

Part Number DS3800NPSR Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800NPSR is a Power Supply Card developed by GE under the Mark IV series. The Mark IV series is used to operate and automate turbines. Two black square-shaped semiconductors are prominently seen on the DS3800NPSR. A white label is attached to each semiconductor. Two medium-sized capacitors are positioned directly above the semiconductors. The designator C is used to identify these capacitors, which are labeled C12 and C2. Below the semiconductors are two little yellow capacitors designated C13 and C3. 

Two larger yellow capacitors are located beneath these capacitors. The PCB has a long black connector port running along the bottom. The numerals 10 to 80 by tens are labeled on this port. Above the two capacitors, there are two small yellow capacitors labeled C14 and C4. There are many other small components on the top half of the PCB. The capacitors and resistors are arranged in three vertical columns. Two integrated circuits can also be found on the top half of the card. One small black transistor is positioned near each integrated circuit. These two transistors are labeled with the letter Q. 

One orange light-emitting diode, or LED, is positioned near the top edge of the board. Above the two blue capacitors, there are two small yellow capacitors labeled C14 and C4. There are many other small components on the top half of the board. One orange light-emitting diode, or LED, is positioned near the top edge of the board. Near the LED, four test spots are also lined up along the upper edge of the board.

Main Functions

Power system monitoring and control:

The power interface board can be used for power system monitoring and control equipment to ensure the safe, stable and reliable operation of the power system.

Power plant automation:

In the power plant, it can be used to connect and manage the power supply of the mastering system and monitoring equipment to improve the automation level of the power plant.

Power transformer and distribution:

Applicable to substations and distribution stations, it is used to govern the power supply of transformers, circuit breakers and other equipments to ensure the high efficiency of power transmission and distribution.

Industrial Process Mastering:

In manufacturing and chemical workshops, this power interface board can be used for power management of automation systems, inner and control equipment to enhance productivity and safety.

Building Automation:

It can be used in building automation system, power supply to lighting, air conditioning, security equipment, etc., to achieve intelligent management of building equipment.

Railway flag signal system:

In the railway system, it is used in the power management of railway flag signal equipment and control system to ensure the stable operation of railway signal system.

Smart Grid:

In the smart grid, the power interface board can be used to connect and manage the digital power equipment and promote the intelligent development of the power grid.

Traffic Flag Signal System:

In the traffic flag signal system of routes and intersections, it is used to supply power to the flag master and equipment to ensure the normal display of traffic signals.

Aerospace:

In aviation and aerospace, the power interface board can be used in the control system of aircraft and spacecraft to provide stable and reliable power support.

It is suitable for land initiatives, oilfield equipment and other categories, providing power support for various land engineering equipment.