Texa Industrie EGO16GT1B Wall Frame Air Conditioner

The Texa Industrie EGO16GT1B is a wall-mounted air conditioner designed for cooling electrical enclosures (including PLC cabinets, control panels, and industrial automation enclosures). This unit provides forced cooling with a built-in PLC controller for autonomous operation. It uses a refrigeration cycle to remove heat from the enclosure interior and expel it to the outside. The EGO16GT1B is suitable for applications where ambient temperatures exceed the equipment's operating range or where internal heat loads are high. The unit includes a digital thermostat, alarms, and fan control.

Technical Specifications

Cooling capacity: 1600 BTU/h (approx. 470 W). Power supply: 24 V DC (or 115/230 V AC, check model). Current consumption: 6 A at 24V DC. Refrigerant: R134a. Operating temperature range: -20°C to +55°C. Enclosure protection: IP34 for external side, IP20 for internal side. Dimensions: 500 mm × 300 mm × 150 mm. Weight: 12 kg. The unit includes a condenser fan, evaporator fan, compressor, and a user interface (display and buttons). It has built-in sensors for temperature control, door switch, and condensate overflow. The air conditioner is designed for wall mounting and includes a mounting template.

Key Features

• Wall-mounted air conditioner for PLC and electrical enclosures

• Cooling capacity 1600 BTU/h

• 24V DC supply (compatible with industrial control voltage)

• Integrated microprocessor controller with digital display

• Automatic condensation evaporation

• Door contact input for alarm

• Remote alarm output (dry contact)

• IP34 external protection

Applications

The EGO16GT1B is used to cool electrical cabinets containing PLCs, drives, industrial computers, and other heat-sensitive equipment. It is suitable for outdoor or dusty environments where fan-only cooling is insufficient. Typical industries include power generation, oil and gas, manufacturing, and water treatment.

Installation

Cut an opening in the enclosure door or side panel according to the supplied template. Mount the unit using screws and seal the gasket. Connect the power supply (24V DC) and optional alarm relay wires. The unit's controller must be set for the desired setpoint and alarm thresholds. Ensure adequate clearance for airflow on both sides. The unit is not designed for use in hazardous areas without additional protection.

Maintenance

Clean the external air intake filter monthly. Check for condensate drain blockages. The compressor and fans are sealed; no user maintenance is required. If the unit fails to cool, verify the power supply, condenser cleanliness, and refrigerant charge (requires technician).

Conclusion

The Texa Industrie EGO16GT1B wall frame air conditioner provides reliable cooling for industrial PLC enclosures, ensuring stable operating temperatures and extending the life of sensitive electronic components.