GE MAVS01L1AB0751D-140393N Solid-State Soft Starter
The GE MAVS01L1AB0751D-140393N is a medium-voltage, solid-state soft starter from General Electric's MV Series, specifically designed for the controlled acceleration and deceleration of high-power three-phase AC induction motors. This device is engineered to manage the high inrush current associated with starting large motors by gradually ramping up the voltage applied to the motor terminals, thereby reducing mechanical stress on the motor, connected equipment such as pumps, fans, and compressors, and the electrical distribution system. The MAVS01L1AB0751D-140393N replaces traditional electromechanical reduced-voltage starters like auto-transformers or wye-delta starters, offering superior control, reliability, and reduced maintenance. It is typically installed between the medium-voltage circuit breaker and the motor.
Technical Specifications
The GE MAVS01L1AB0751D-140393N is rated for a system voltage of 7.2 kV based on the L1 code designation. The motor full load current rating is 751 Amps based on the 0751 code, representing the key sizing parameter for the soft starter. The starting method employs solid-state voltage ramp control using thyristors (SCRs) to regulate the voltage applied to the motor. Control power typically requires a low-voltage AC or DC supply such as 120V AC or 125V DC for the control circuits. The starter features an integrated bypass contactor that closes once the motor reaches full speed, shunting current around the SCRs to eliminate heat losses and increase efficiency and reliability.
Control and Protection Features
The MAVS01L1AB0751D-140393N offers adjustable start voltage, ramp time, current limit, and soft stop or deceleration control. Advanced units may include pump control to reduce water hammer effects and torque control for specialized applications. Integrated motor protection features include overload protection, overcurrent protection, phase unbalance and phase loss detection, undercurrent protection, excessive starts protection, thyristor over-temperature protection, and ground fault detection. These comprehensive protection functions ensure safe motor operation under all conditions while maximizing equipment life.
Communication and Integration
The soft starter includes serial communication capabilities supporting Modbus RTU protocol, along with hardwired I/O for integration into DCS and PLC systems. Optional Ethernet or other fieldbus cards may be available for enhanced connectivity. The starter is housed in a freestanding metallic cabinet with enclosure rating depending on the B code, typically NEMA 1 for indoor applications or NEMA 3R for outdoor installations. Forced air cooling ensures reliable operation under full load conditions, while the robust construction is designed for demanding industrial environments.
Applications
The GE MAVS01L1AB0751D-140393N is deployed in heavy industrial applications requiring controlled starting of large medium-voltage motors. Typical applications include pumps in water and wastewater treatment facilities, fans in HVAC and ventilation systems, compressors in industrial gas and air systems, conveyors in mining and material handling, and mills and crushers in mineral processing. The soft starter is also used in marine propulsion systems, oil and gas pumping stations, and any application where motor inrush current management and mechanical stress reduction are critical for equipment longevity and power system stability.
