​HIMA X-SB01 985210207 Digital input module

HIMA X-SB01 985210207 Digital input module 

Basic Information

Product Name：HIMA X-SB01 985210207 Digital Input Module

Brand: HIMA

Model No: X-SB01 985210207

Technical specifications

Operating voltage: usually 220V or 24VDC (specific may vary according to product batch or custom requirements)

Output Frequency: The output frequency of HIMA products is mentioned as 350kHz in some information, but the output frequency information specifically for X-SB01 985210207 may be different, further confirmation is required.

Power: The power information of some HIMA products is 1200W, but the specific power for this digital input module should be directly consulted with the supplier.

Environment: Normal temperature and pressure, indicating that the module is suitable for general industrial environments.

Warranty: one year, showing the supplier's confidence in the quality of the product and the protection provided.

Product Parameters

– Input channels :16 or 32
– Input voltage range :0 to 125v DC
– Input current range :4-20mA
– Operating temperature range :-40 ° C to 70 ° C
– Module type: Enter a number
– Compatibility :Mark VIe control system

FEATURES

– High-density digital input module
– Input channels can be configured
– Status indicator and diagnostic indicator
– Supports hot swap, facilitating installation and maintenance
– Robust design for industrial environments
– Built-in diagnostics for troubleshooting

Instructions and warnings related to the operation of the product:

The following specifications must be strictly observed:

 The technical specifications and typical applications of the product system must be strictly observed.

 PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the

These personnel must be instructed and briefed on the conditions in the hazardous area.

 Unauthorised modifications: No modifications or structural changes may be made to the product system.

 Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.

 Working environment: The user must fulfil the specified environmental conditions:

Safety regulations

The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:

1 Disconnect completely.

2 Secure to prevent reconnection.

3 Confirm that the installation has been completed.

4 Perform grounding and short-circuiting.