GE IC3600LDDB1 Printed circuit board
GE IC3600LDDB1 Printed circuit board
General Information
Brand: General Electric (GE)
Model: IC3600LDDB1
Type: Display driver card
Series: Mark I - II IC3600
Features
Communication Interface: The board is equipped with a row of metal pins on one edge for wiring into the main system, enabling communication between the system and the board.
Component Layout: It is equipped with aluminum electrolytic and polyester vinyl capacitors. The resistors are made of carbon composite material. Many components are vertically mounted on the board, and there are twenty - two transistors of two styles.
Applications
The IC3600LDDB1 is used in GE's Mark I and Mark II series systems, which are mainly applied in the control of gas turbines. In these systems, it plays a role in the following aspects:
Fuel Flow Control: The control of gas turbines is achieved by regulating the fuel flow to the combustion system. The IC3600LDDB1 is involved in controlling the fuel flow, which is adjusted according to the requirements of the temperature control system, speed control system, or startup control.
Air - Flow Adjustment: In some applications with exhaust heat recovery, it helps adjust the cycle of air - flow by changing the compressor speed or the position of variable inlet guide vanes to enhance part - load performance.
Instructions and warnings related to the operation of the product:
The following specifications must be strictly observed:
l The technical specifications and typical applications of the product system must be strictly observed.
l PERSONNEL TRAINING: Only trained personnel may install, operate, maintain or repair the product system. These personnel must be instructed on the
Hazardous area conditions must be instructed and explained to these personnel.
l Unauthorised modifications: No modifications or structural changes may be made to the product system.
l Maintenance Responsibility: It must be ensured that the product system is only used under appropriate conditions and in a condition that is fully fit for purpose.
l Working environment: The user must fulfil the specified environmental conditions:
Safety regulations
The following safety regulations must be fully observed when (maintenance) work is carried out on the product system:
1 Disconnect completely.
2 Secure to prevent reconnection.
3 Confirm that the installation has been completed.
4 Perform grounding and short-circuiting.
email:1583694102@qq.com
wang@kongjiangauto.com