GE IS200TPROH1B | General Electric Mark VI Board

GE IS200TPROH1B | General Electric Mark VI Board

Product Description P/N: CU-AL Description / Specifications Description The General Electric TCAL81 is a trip unit designed for use with K1200/SK1200/TB8 Series Molded Case Circuit Breakers. It accommodates CU-AL (Copper-Aluminum) wiring and supports wire sizes ranging from 3/0 AWG to 500 kcmil. The unit is equipped with a single lug and is suitable for voltage applications in the range of 125 to 250 VDC and 240 VAC. Technical Specifications Specifications Part # CU-AL Manufacturer MERSEN Brand FERRAZ SHAWMUT Category Panel Accessories Subcategory Fuse Holder Specifications Voltage 125 to 250 VDC, 240 VAC Wire Sizes 3/0 AWG to 500 kcmil Material Copper/Aluminum Suitable For Use With K1200/SK1200/TB8 Series Molded Case Circuit Breaker Information About CU-AL The General Electric TCAL81 is a trip unit specifically engineered for compatibility with CU-AL (Copper-Aluminum) wiring configurations. It is designed to accommodate wire sizes ranging from 3/0 AWG to 500 kcmil. Equipped with a single lug, the TCAL81 is adept at facilitating secure electrical connections in various industrial contexts. With operational specifications spanning voltages from 125 to 250 VDC and 240 VAC, the TCAL81 demonstrates adaptability to diverse electrical environments. 

Its capability to manage a broad spectrum of voltages ensures its utility across a range of applications and scenarios. Primarily intended for use with the K1200/SK1200/TB8 Series Molded Case Circuit Breaker, the TCAL81 exhibits seamless integration within existing electrical systems. Its compatibility with these specific circuit breaker series underscores its versatility and suitability for a variety of circuit protection setups. The TCAL81's design emphasizes efficiency and reliability in electrical installations, offering robust performance in demanding operational conditions. Its adherence to industry-standard wire size and voltage specifications enhances its interoperability and ease of integration within electrical networks. The utilization of CU-AL wiring materials aligns with industry standards and ensures compliance with regulatory requirements governing electrical installations. 

The TCAL81's compatibility with CU-AL wiring underscores its adherence to established industry practices and norms. The TCAL81's single lug design facilitates straightforward installation and maintenance procedures, minimizing downtime and enhancing operational efficiency. Its user-friendly configuration enhances ease of use and simplifies the process of integrating the trip unit into existing electrical systems. Manufacturer information General Electric (GE)is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required