LTi SO84.032 ServoOne Drive Controller 32A BG4
The LTi SO84.032 is the highest power variant in the BG4 housing, offering 32A continuous and 64A peak current. Designed for three-phase mains (230-480V), this drive tackles heavy-duty single-axis applications. Both air-cooled and liquid-cooled versions are available.
Main Specifications
Rated current: 32 A (400V, 8 kHz), peak: 64 A (0-5 Hz)
Mains: 3 x 230/400/460/480V AC ±10%
Switching frequencies: 4, 8, 12, 16 kHz
BG4 dimensions: width 171 mm, height 345 mm, depth 242 mm (air)
Weight: 7.5 kg (air) / similar for liquid
Integrated brake chopper
Technical Data
Power Ratings
Rated output current: 32 A
Peak current (0-5 Hz): 64 A
Connected load: 22.2 kVA (with mains choke)
Power loss at IN: 420 W (8 kHz)
DC link capacitance: 2000 μF
Braking
Brake chopper threshold: 650V DC (400V) / 820V (460/480V)
Minimum external braking resistor: 10 Ω
Continuous braking power (external): 67 kW
Peak braking power: 67 kW
Optional internal braking resistor: 10 Ω, continuous 1350 W, peak 67 kW
Cooling Options
Air-cooled: requires 150 mm clearance above/below
Liquid-cooled: nominal flow 3 l/min, pressure 1/2 bar, coolant temp 5-40°C
Liquid-cooled dimensions: 171 x 345 x 198.3 mm
Control Interfaces
24V control supply (6A start, 2A continuous)
6 digital inputs, 3 digital outputs, relay
2 analog inputs (±10V)
Resolver (X6) and high-resolution encoder (X7)
USB, Ethernet, MMC slot, option 1 (fieldbus), option 2 (technology)
Installation Guidelines
Mount vertically on a conductive plate. For air-cooled versions, ensure unobstructed airflow. For liquid-cooled, connect to a cooling circuit with clean water+corrosion inhibitor. The device will shut down at 65°C heat sink temperature. Use shielded motor cables (max 10 m for full current rating). External mains choke is mandatory for BG5 and above, but recommended for BG4 in harsh environments.
Commissioning
After wiring, apply 24V control supply. Use DriveManager 5 to set motor parameters, configure I/O, and tune the controller. The STO function must be wired to enable the power stage. The 7-segment display shows status and error codes. Parameter sets can be downloaded/uploaded via MMC card for series commissioning.
Typical Applications
Ideal for servo motors up to 15 kW (400V). Applications include heavy-duty robotics, large winding machines, metal cutting, and test benches. The 64A peak ensures rapid acceleration and high torque at low speeds.
Compliance
Complies with 2006/95/EC, 2004/108/EC, EN 61800-5-1, EN 61800-3 (C2/C3). UL approval conditions apply.
The LTi SO84.032 delivers robust, high-power servo control for the most demanding single-axis tasks.
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
-
Foxboro E69F Converter -
Foxboro DCS Compact200 series RH916RB (16 slot horizontal bottom plate) -
Reliability Electric PSC7000 Control Card Troubleshooting and Maintenance -
Eaton MTL F809F Plus DTM Operating Instructions -
Motorola ACE3600 RTU Troubleshooting Guide -
MOOG D136-003-001 on-site deployment and troubleshooting -
Troubleshooting and Maintenance of Micro Panel GF1-10 Touchscreen -
Neles NDX Intelligent Valve Positioner Troubleshooting and Debugging -
Jamesbury VPVL Mod D Maintenance and Troubleshooting -
Jamesbury VPVL Pneumatic actuator selection and maintenance guide -
GMW IPP 144-40 GS Thermal Printer Troubleshooting Guide -
Meggitt C327845 Gas Shutoff Valve Troubleshooting and Replacement Guide -
Meggitt C422685 Gas Solenoid Valve Troubleshooting Guide -
LTI ServoOne Servo Troubleshooting Guide -
Jenaer Antriebstechnik ECOVARIO Servo Troubleshooting Guide -
Honeywell TDC3000X Troubleshooting Guide -
Honeywell NOTIFIER NFS2-3030 Troubleshooting Guide -
Troubleshooting of Honeywell FC series safety barriers -
Honeywell XL1404 Troubleshooting Guide -
Honeywell TDC 3000 Troubleshooting and Module Replacement Guide -
HIMA X-DI 64 01 Safety Module -
Hirschmann MICE MS20/MS30 Switch Integration and Troubleshooting -
EXOR ePAD05/ePAD06 button screen replacement and troubleshooting -
EXOR eVO58-TST/TNT Compact HMI Human Machine Panel -
Esd VME-PCM-CADDY/2 Carrier Board Integration and Troubleshooting Guide -
Elmo Gold Tuba Servo Drive Integration and Troubleshooting Guide -
Eaton COM-MPB1-TP/MPB2-TP communication module -
DeltaTau PMAC2 PCI Ultralite Programmable Multi Axis Motion Controller -
DATA PATTERNS DP-VME-5114 Dual PMC Carrier Board Integration and Troubleshooting -
CMZ SVM1608 Intelligent Servo Driver -
SUMITOMO T2100Z steel turning selection and troubleshooting -
SUMITOMO PSZ Turn Quick Change System Selection and Troubleshooting -
SUMITOMO EGU chip breaker selection and troubleshooting -
SUMITOMO GND slotting tool holder selection and troubleshooting -
SUMITOMO AC8000P steel turning selection and troubleshooting -
SUMITOMO AC6000M Stainless Steel Turning Guide -
SUMITOMO ELECTRIC AC5000S Heat Resistant Alloy Turning Guide -
SUMITOMO ELECTRIC AC4000K Cast Iron Turning Selection Guide -
SUMITOMO ELECTRIC AC1135U Small Parts Turning Application Guide -
SUMITOMO ELECTRIC AC1030U Precision Machining Selection and Practice for Small Parts -
CCS 6900G/P pressure switch -
BENDER WR Transformer Selection -
BENDER RCMA475LY Residual Current Monitoring -
BENDER IRDH575 Insulation Monitoring -
BENDER IRDH265 Insulation Monitoring and Debugging -
Bender RCMA475LY residual current monitor debugging -
Beckwith Electric M-3425A Generator Protection Relay Debugging Guide -
Automated MEX816U Expander Troubleshooting Guide -
ASEM HT2150 Industrial Tablet Selection and Troubleshooting -
Troubleshooting and practical application of Advantest U3771/3772 microwave spectrum analyzer -
Advantest R6144 Programmable DC Voltage/Current Source (Calibration Source) Calibration and Maintenance -
Aerotech UNIDEX 100/U100i single axis motion controller -
Aerotech Ndrive MP Ultra Compact PWM Digital Servo Driver -
Aerotech Ndrive HPe 10/20/30 High Performance PWM Digital Servo Drive -
Aerotech Ndrive HLe maintenance replacement -
Aerotech Ndrive CP maintenance replacement -
Aerotech Ndrive Linear Drive Selection -
Aerotech NDrive HL linear drive maintenance replacement -
Aerotech NDrive HP 10/20/30 Maintenance and Replacement -
Aerotech NDrive CP10 Servo Drive Guide -
SIGMATEK TAE1941 Display Unit Replacement and Troubleshooting -
SIGMATEK TAE151 Replacement and Troubleshooting -
SIGMATEK AKM Servo Motor Replacement and Troubleshooting Guide -
SIGMATEK S-DIAS Control System Replacement and Upgrade Guide -
SIGMATEK ETT Series HMI Replacement and Selection Guide -
SIGMATEK DIAS Drive 310-23 servo amplifier -
SIGMATEK CCP 521 C-DIAS processor module -
Megmeet L6 electric drive troubleshooting -
Sysmex XN-1000/2000 Technical Guide -
Sysmex XN-L blood analyzer maintenance and troubleshooting -
Troubleshooting and Maintenance of Sysmex XN-9000 -
LTI Motion ServoOne PROFIBUS/PROFINET Troubleshooting and Replacement -
Micro Innovation MICRO GF1 Touch Screen Troubleshooting and Replacement -
Troubleshooting and Replacement of Micro Innovation WINbloc Distributed I/O System -
MICRO PANEL GS-2 Troubleshooting and Debugging -
LTi Synchronous Motor LST/LSH Replacement Selection Guide -
Fault diagnosis of LTi CDE/CDB3000 -
Maintenance and troubleshooting of ENOTEC SILOTEC 8000 silo analyzer -
ENOTEC ENSITU 7000 Oxygen Analyzer -
ENOTEC COMTEC 6000 ATEX GasEx Analyzer Maintenance, Calibration, and Troubleshooting Guide -
ENOTEC Analyzer Family Selection Guide -
ENOTEC OXITEC 500E Oxygen Analyzer -
KUKA KR CS Box-2 Compact Controller for Four Axis SCARA Robot -
KUKA KR C5 slim-2 Robot Controller -
KUKA KR C5 micro KSS troubleshooting -
KUKA KR C5 micro debugging and troubleshooting -
KUKA KR C5 Controller Assembly and Troubleshooting -
KUKA KR C5 Cabinet Assembly and Troubleshooting -
KUKA KR C4 Smallsize-2 Debugging Guide -
KUKA KR C4 Midsize Assembly Guide -
ENOTEC OXITEC 5000 Oxygen Analyzer Maintenance Guide -
KUKA KR C4 extended assembly and debugging -
KUKA KR C4 compact assembly and debugging -
KUKA Sunrise Cabinet Med Medical Collaborative Robot Special Control Cabinet -
KUKA Sunrise Cabinet Next Generation Small Control Cabinet -
KUKA KR C4 Smallsize-2 family's smallest control cabinet -
KUKA KR C4 Midsize Fault Diagnosis -
KUKA KR C4 extended is a high-power multi axis control cabinet -
Troubleshooting and Maintenance of KUKA KR C4 Control Cabinet -
Troubleshooting and Maintenance of KUKA KR C4 Compact Control Cabinet -
KUKA KR15 DELTA-2 V2 Robot Installation and Debugging -
KUKA TITAN-2 Ultra Assembly and Maintenance Guide -
KUKA KR SCARA-2 CS Assembly, Debugging, and Operation Guide -
Troubleshooting KUKA SCARA X -
Troubleshooting of KUKA KR FORTEC-2 ultra -
Troubleshooting of KUKA KR FORTEC-2 -
Troubleshooting KUKA KR 1000 Titan -
Troubleshooting of KUKA KR 600 FORTEC -
KUKA KR 500 MT FORTEC Maintenance and Inspection -
KUKA KR 360 FORTEC Inspection and Maintenance Guide -
Troubleshooting KUKA Sunrise Cabinet Med -
KUKA KR SCARA HO Assembly and Maintenance -
KUKA QUANTEC-2 PA maintenance troubleshooting -
KUKA QUANTEC-2 K/P Maintenance Troubleshooting Guide -
KUKA QUANTEC-2 HO Maintenance Guide -
KUKA KR QUANTEC-2 HC Maintenance and Rescue Guide -
KUKA KR QUANTEC-2 Maintenance Troubleshooting Guide -
KUKA KR QUANTEC PA series heavy-duty palletizing robot -
KUKA KR IONTEC-2 Debugging and Maintenance Guide -
KUKA KR IONTEC ultra series six axis heavy-duty industrial robot -
KUKA KR IONTEC HO Maintenance Troubleshooting Guide -
KUKA KR CYBERTECH-3 HW maintenance troubleshooting -
KUKA KR CYBERTECH-3 maintenance troubleshooting -
KUKA KR8 R2100-2 arc HW maintenance troubleshooting -
KUKA KR CYBERTECH nano-2 maintenance troubleshooting -
KUKA KR 20 R1810 HO maintenance troubleshooting -
KUKA CYBERTECH maintenance troubleshooting -
KUKA KR CYBERTECH CR maintenance troubleshooting
