The National Instruments NI 9881 is a one port CANopen interface module in the C Series form factor. It is designed for CompactRIO systems and provides CANopen communication for industrial automation, machine control, and embedded applications. The module supports process data objects and service data objects according to the CiA DS 301 specification and operates over a wide temperature range.
CANopen is a communication protocol built on the CAN physical layer and is widely used in industrial automation for connecting drives, I O modules, sensors, and controllers. The NI 9881 brings CANopen connectivity to CompactRIO, allowing the controller to exchange process data with CANopen devices and integrate them into a larger control or monitoring system.
CANopen Communication
The NI 9881 provides one CANopen channel with a maximum baud rate of 1 Mbit/s. It can transmit and receive process data objects and service data objects, and it supports LSS services for configuring slave nodes. Engineers should verify network configuration, node addressing, and baud rate for each device.
Proper termination and cabling are important for reliable CANopen communication. The module should be connected with correct stub length and termination. Engineers should verify network voltage and grounding.
CompactRIO Integration
The NI 9881 operates in compatible CompactRIO systems. It can be combined with analog input, digital I O, and other communication modules. The FPGA and real time controller can process CANopen data and integrate it with control logic and measurements.
The module is designed for industrial environments with an operating temperature range of 40 to 70 degrees Celsius below zero. Conformal coated variants are available for harsh conditions.
Software and Driver Support
The NI 9881 is configured through NI Industrial Communications for CANopen software and LabVIEW. Engineers can define PDO and SDO communication, configure slave nodes, and integrate CANopen data into applications. Software should include error handling, timeout detection, and safe state behavior.
Applications
The NI 9881 is suited to industrial automation, machine control, drive integration, and embedded monitoring. It supports CANopen communication in a CompactRIO system.
Installation and Maintenance
Installation requires a compatible C Series slot and CANopen wiring according to the product documentation. Termination and baud rate should be verified. The chassis should provide adequate cooling and protection.
Maintenance includes checking connectors, verifying bus termination, and reviewing software configuration. Documentation of network settings helps troubleshooting.
Summary
The National Instruments NI 9881 CANopen Interface Module provides one CANopen port for CompactRIO systems with up to 1 Mbit/s communication. It supports PDO and SDO exchange and integrates industrial devices into CompactRIO applications. The module is a practical choice for engineers who need CANopen connectivity in a rugged embedded platform.




