The National Instruments BNC-2090 is a shielded BNC terminal block designed for use with compatible NI data acquisition devices. It converts a 68 pin DAQ connector into a set of BNC connectors and spring terminals, making it easier to connect signal sources, probes, and cables in a laboratory or test bench. The accessory is used in measurement setups where BNC cabling is preferred for signal integrity and quick connection.
Terminal blocks and connector accessories define how field wiring reaches the DAQ device. A well designed accessory provides secure connections, shielding, and clear channel labeling. The BNC-2090 is matched to compatible NI DAQ devices, so channel mapping and connector layout remain consistent with the instrument.
Connector and Terminal Layout
The BNC-2090 provides BNC connectors for analog input channels along with spring terminals for additional signals and reference connections. Engineers should verify the pin mapping between the DAQ device and the accessory so that software channel numbers match the physical connectors.
Labeling of connectors and cables is important in multi channel systems. A documented channel map reduces wiring errors and speeds up troubleshooting when a setup is reconfigured.
Shielding and Signal Integrity
The accessory is housed in a shielded enclosure that helps reduce electromagnetic interference on low level analog signals. BNC connections provide controlled impedance and a familiar interface for probes and coaxial cable.
Proper grounding practice remains essential. Cable shields should be terminated according to the system design, and high level signals should be separated from low level analog wiring. Long cables should be reviewed for noise pickup and settling effects.
Compatibility and Integration
The BNC-2090 is designed for compatible NI DAQ devices with a 68 pin connector. Engineers should confirm compatibility in the product documentation before connection, since DAQ devices differ in pin assignment and supported functions.
The accessory is typically mounted on a bench or in a rack near the DAQ hardware. Cable routing should allow access to connectors and avoid mechanical strain.
Software and Measurement Planning
The accessory does not change the measurement capabilities of the DAQ device. Channel configuration, input range, and timing are defined in software. The accessory simply provides the physical connection point.
Engineers should document which device channel connects to which BNC connector, along with the signal range and scaling. This record supports repeatability across experiments and simplifies service when cables are replaced.
Applications
The BNC-2090 is suited to laboratory measurement, sensor characterization, test fixture wiring, and educational experiments. It supports quick connection of probes and signal sources to compatible DAQ hardware.
Installation and Maintenance
Installation requires connecting the accessory to the DAQ device with the appropriate cable, then connecting field signals to the BNC and spring terminals. Cables should be labeled and secured.
Maintenance includes inspecting connectors, checking shield continuity, and verifying channel mapping against the software configuration. Damaged cables should be replaced to preserve signal quality.
Summary
The National Instruments BNC-2090 BNC Accessory provides shielded BNC and spring terminal connections for compatible NI DAQ devices. It supports clean signal routing in laboratory and test systems. The accessory is a practical choice for engineers who need a reliable and well organized interface between field wiring and DAQ hardware.




