Product Overview
The National Instruments PCIe-6374 is a multifunction data acquisition card for PCI Express computers. It belongs to the NI X Series DAQ family and provides 32 analog input channels with 16 bit resolution and a maximum single channel sampling rate of 3.5 MS/s. The card also includes four analog output channels, 48 digital input and output lines, and four counters.
The PCIe-6374 installs in a PCI Express slot and is supported by NI-DAQmx software. Its high sampling rate and channel count make it suitable for demanding test applications that require fast acquisition across many channels, while the analog output and digital functions support mixed signal test in one card.
High Speed Analog Input
The card provides 32 analog input channels with 16 bit resolution and a maximum single channel rate of 3.5 MS/s, with the aggregate rate shared across active channels. Selectable input ranges, including plus or minus 10 V, plus or minus 5 V, and plus or minus 1 V, allow the card to match different signal levels and use the available resolution effectively.
Hardware timed acquisition, external sample clocks, and triggering support repeatable measurement sequences. Multichannel scanning can be configured for single ended or differential connections depending on the accessory and wiring. Differential wiring is often preferred for low level signals and for rejecting common mode noise.
Analog Output and Digital I/O
The card includes four 16 bit analog output channels for control voltages, setpoints, and waveform generation. Hardware timed output produces deterministic waveform sequences, which is useful for stimulus response testing, actuator command profiles, and control loop evaluation.
Forty eight digital lines provide logic level control, relay driving through external conditioning, and status monitoring. Four 32 bit counters support event counting, frequency measurement, pulse generation, and encoder position tracking. Because analog and digital tasks can share timing signals, the card can implement coordinated mixed signal sequences.
Timing and Synchronization
NI-DAQmx provides start triggers, reference triggers, pause triggers, and sample clock configuration for the PCIe-6374. These features allow acquisition and generation to be aligned with external events or with other DAQ devices. Counter outputs can be routed as triggers, and analog or digital events can gate tasks.
For larger systems, multiple cards can be synchronized using shared timing and trigger signals where supported. Engineers should document clock sources and trigger routes so that test sequences can be reproduced across stations.
Software and Accessories
The PCIe-6374 is supported by NI-DAQmx and can be programmed with LabVIEW, LabWindows/CVI, Measurement Studio, and other NI-DAQmx compatible environments. The driver handles channel configuration, scaling, calibration metadata, and task management. Screw terminal and mass termination accessories are available for different wiring needs.
Installation requires a PCI Express slot with adequate airflow and a host computer within the supported specifications. Cables should be routed away from power switching equipment, and shields should be terminated according to the accessory documentation.
Typical Applications
High speed multi channel analog data acquisition
Waveform generation and stimulus response test
Mixed signal automated test systems
Encoder position and frequency measurement
Laboratory measurement and prototype validation
PCI Express based test and control systems
The PCIe-6374 provides 32 analog inputs at 3.5 MS/s, 4 analog outputs, 48 digital lines, and 4 counters in an X Series PCI Express card. Its speed, channel count, and NI-DAQmx support make it suitable for demanding measurement and control applications.




