The National Instruments PXI-6025E, part number 777798-01, is a multifunction data acquisition card for PXI systems. It belongs to the E Series family and provides 16 analog input channels with 16 bit resolution and sampling rates up to 200 kS/s. The card also includes analog output channels and an extended set of digital I O lines, along with counter functions. It is used in automated test, laboratory measurement, and industrial data acquisition built around a PXI chassis.
The E in the model designation indicates an extended digital I O complement compared with standard E Series cards. This makes the PXI-6025E suitable for test systems that need both analog measurement and a substantial number of digital control lines.
Analog Input
The card provides 16 single ended or 8 differential analog input channels with 16 bit resolution. Input range and sample rate are configurable, and channels can be grouped into tasks. For scanned multi channel acquisition, the sample rate is divided across active channels, so settling time and source impedance affect achievable accuracy.
Differential wiring is generally preferred for low level signals or where ground potentials differ. Proper grounding and shielding help maintain signal quality in dense multi channel systems.
Analog Output and Extended Digital I O
The card includes analog output channels for stimulus generation and reference levels. The extended digital I O complement supports relay control, fixture switching, and status monitoring across many lines, which is valuable when a test fixture has numerous control and sense points.
Counter functions support event counting, pulse generation, and frequency measurement. These functions can be synchronized with analog acquisition through the card timing engine.
PXI Integration and Timing
The PXI-6025E installs in a compatible PXI slot and communicates through the backplane. The PXI backplane provides trigger lines and clock resources that allow the DAQ card to coordinate with switches, digitizers, and other instruments.
Engineers should document trigger and clock routing so that behavior remains predictable when the system is modified. Chassis planning should consider power budget, cooling, and access to terminal blocks.
Software and Driver Support
The card is configured through NI data acquisition software and standard programming environments. Applications define channels, timing, and triggering, then acquire or generate data. Documentation of pin assignments, scaling, and task definitions supports repeatability.
Applications
The PXI-6025E is suited to automated test, laboratory automation, fixture control, and data logging. Its combination of analog measurement and extended digital I O supports test stations with many control points.
Installation and Maintenance
Installation requires a compatible PXI slot, driver installation, and connection of terminal blocks or cable assemblies. Proper grounding and shielding help maintain signal quality. High level signals should be separated from low level analog wiring.
Maintenance includes checking connections, verifying channel configuration, and confirming calibration. Documentation supports troubleshooting and repeatability.
Summary
The National Instruments PXI-6025E Multifunction DAQ Card provides 16 bit analog input at 200 kS/s, analog output, extended digital I O, and counters for PXI systems. It supports measurement and control in a modular chassis. The card is a practical choice for engineers who need both analog acquisition and many digital lines in one PXI module.




