Product Overview
The National Instruments PXI-6040E is a multifunction data acquisition module for PXI systems. It belongs to the NI E Series DAQ family and provides 16 analog input channels with 12 bit resolution. The module also includes analog output channels and digital input and output lines, making it suitable for general purpose measurement and control applications.
The PXI-6040E installs in a compatible PXI slot and is supported by NI-DAQmx software. Its combination of channel count and mixed signal functions makes it suitable for automated test, laboratory measurement, and industrial monitoring.
Analog Input Performance
The module provides 16 analog input channels with 12 bit resolution. Selectable input ranges allow the module to match different signal levels. Hardware timed acquisition, external sample clocks, and triggering support repeatable measurement sequences.
Multichannel scanning can be configured for single ended or differential connections depending on the accessory and wiring. Differential wiring is often preferred for low level signals and for rejecting common mode noise.
Analog Output and Digital I/O
The module includes analog output channels for control voltages, setpoints, and simple waveforms. Hardware timed output supports repeatable waveform sequences, which is useful for stimulus response testing. Engineers should verify the load and settling requirements of the driven device.
Digital input and output lines provide logic level control and status monitoring. The module can use these lines for triggering, handshaking, or simple device control in a test sequence.
Timing and PXI Integration
NI-DAQmx provides trigger and clock configuration for the PXI-6040E. Start triggers, reference triggers, and sample clocks allow acquisition to be aligned with external events. Within a PXI chassis, the module can share trigger lines and clocks with other instruments.
Engineers should document the clock source and trigger routing so that the test sequence can be reproduced. For systems that require more channels, additional modules can be synchronized where the architecture supports shared timing.
Software and Accessories
The PXI-6040E is supported by NI-DAQmx and can be programmed with LabVIEW, LabWindows/CVI, Measurement Studio, and other NI-DAQmx compatible environments. The driver handles channel configuration, scaling, calibration metadata, and task management.
Installation requires a compatible PXI slot with adequate airflow and a chassis within the supported specifications. Cables should be routed away from power switching equipment, and shields should be terminated according to the accessory documentation.
Typical Applications
General purpose analog data acquisition
Laboratory measurement and data logging
Automated test with mixed analog and digital signals
Sensor and transducer measurement
Analog stimulus and control
PXI based test and measurement systems
The PXI-6040E provides 16 analog inputs with 12 bit resolution, analog outputs, and digital I/O in an E Series PXI module. Its balanced capabilities and NI-DAQmx support make it suitable for general purpose measurement and control applications.




