Product Overview
The National Instruments TC-4353 is a thermocouple terminal block for PXI systems. It is designed for use with the PXIe-4353 temperature input module, providing the connection point for thermocouple wiring and supporting the cold junction reference needed for accurate temperature measurement. The terminal block organizes field wiring and simplifies installation in multi channel temperature monitoring systems.
The TC-4353 is part of the NI PXI temperature measurement ecosystem. It works with the PXIe-4353 module, which provides the analog input channels, cold junction compensation, and filtering required for thermocouple measurement. Together, the module and terminal block form a complete interface for temperature sensors in automated test and industrial monitoring applications.
Thermocouple Connection
The terminal block provides screw terminal connections for thermocouple leads. Engineers should confirm the supported thermocouple types and the channel mapping for the PXIe-4353 configuration against the product documentation. Correct polarity and the use of appropriate thermocouple wire are essential for accurate readings.
Thermocouple signals are low level, so careful wiring practice is important. Shielded thermocouple cable, separation from power conductors, and proper grounding help reduce noise pickup. The terminal block is designed to support these practices and to keep field wiring organized.
Cold Junction Compensation
Accurate thermocouple measurement requires knowledge of the reference junction temperature at the terminal connection point. The TC-4353 supports cold junction compensation in conjunction with the PXIe-4353 module. Engineers should verify that the terminal block and module are properly connected and that the cold junction reference is stable during measurement.
Thermal gradients across the terminal block can affect cold junction accuracy. The terminal block should be installed so that it is not exposed to rapid temperature changes or direct heat sources. Allowing the system to stabilize before critical measurements helps maintain accuracy.
PXI Integration
The TC-4353 connects to the PXIe-4353 module installed in a PXI Express chassis. The module handles the analog to digital conversion and communicates with the controller over the PXI backplane. Engineers should confirm that the terminal block is compatible with the specific module variant and chassis in use.
The PXI platform provides timing and synchronization resources that allow temperature measurements to be correlated with other instruments in the same chassis. This is useful in thermal test systems where temperature, power, and electrical signals must be compared in time.
Installation and Wiring Practice
Installation should follow the module and terminal block documentation. Connectors should be fully engaged and secured, and wiring should be strain relieved to prevent intermittent connections. In industrial cabinets, cable routing away from power conductors reduces noise pickup.
Engineers should inspect the terminal block for damage or contamination before installation. Loose strands, damaged insulation, and incorrect polarity should be corrected before power is applied. Documentation of channel assignments and thermocouple types supports maintenance and troubleshooting.
Typical Applications
Multi point thermocouple temperature measurement
Environmental chamber and thermal cycling test
Electronics thermal validation
Industrial process temperature monitoring
PXI based temperature data acquisition systems
Battery and power module thermal testing
The TC-4353 provides a thermocouple terminal block for the PXIe-4353 module in PXI systems. Its organized wiring interface and support for cold junction compensation make it a practical accessory for accurate multi channel temperature measurement.




