Product Overview
The National Instruments cFP-AI-112 is an analog input module for Compact FieldPoint systems. It provides 16 analog input channels with 16 bit resolution and supports selectable voltage and current input ranges. The module is designed for industrial measurement applications where sensors are distributed across a machine or process area and where robust, modular I/O is required.
The cFP-AI-112 is part of the NI Compact FieldPoint platform, which places signal conditioning and I/O modules close to sensors and connects them through a network module. This distributed architecture reduces long cable runs and simplifies wiring in industrial installations.
Analog Input Channels
The module provides 16 analog input channels with 16 bit resolution. Input ranges can be selected to match the connected sensors, including common voltage and current ranges used in industrial transmitters and transducers. Engineers should confirm the exact supported ranges and accuracy specifications for the module configuration against the product documentation.
Input filtering and signal conditioning help maintain measurement stability in electrically noisy environments. Engineers should use appropriate wiring, shielding, and grounding for the sensor type and the installation location.
Compact FieldPoint Integration
The cFP-AI-112 installs in a Compact FieldPoint backplane along with other I/O modules and a network module. The network module handles communication with the host or control system. Engineers should verify that the backplane and network module support the number and type of modules in the planned system.
Module positions and channel mapping should be documented during commissioning. Consistent labeling helps during maintenance and troubleshooting. The distributed design allows the I/O to be mounted near the process.
Industrial Installation
Compact FieldPoint hardware is designed for industrial installation. Modules should be mounted where the operating temperature range is respected and where the enclosure protects against moisture, dust, and contaminants. DIN rail mounting is common, and engineers should leave clearance for wiring and ventilation.
Proper grounding and shielding are important for reliable measurement. Signal wiring should be separated from power conductors, and shields should be terminated according to the documentation.
Software and System Integration
The cFP-AI-112 is supported by NI software for Compact FieldPoint systems. Engineers can configure the module and access measurement data from LabVIEW and other compatible development environments. Applications can read inputs, apply scaling, and log data through the FieldPoint driver interface.
Distributed FieldPoint systems can be integrated with other NI hardware in a larger test or control architecture. Engineers should document network settings, module configuration, and channel scaling so that the system can be maintained and replicated.
Typical Applications
Distributed industrial analog measurement
Process sensor monitoring in plant areas
Machine and utility monitoring
Environmental and facility data acquisition
Legacy FieldPoint system expansion
Industrial test stands with spread out sensors
The cFP-AI-112 provides 16 analog input channels with 16 bit resolution for Compact FieldPoint systems. Its channel count and distributed architecture make it suitable for measurement applications where sensors are spread across a facility.




