Pepperl+Fuchs RSD-TI-EX8 Intrinsically Safe Temperature Module
The Pepperl+Fuchs RSD-TI-EX8 is an 8-channel intrinsically safe temperature input module designed for hazardous area applications. It provides a direct interface between field temperature sensors and a PROFINET or EtherNet/IP-based control system, eliminating the need for external safety barriers. Certified for use in Zone 2 explosive atmospheres, it is ideal for the chemical, petrochemical, pharmaceutical and natural gas industries, where it ensures safe and accurate temperature monitoring of reactors, pipelines and storage tanks.
Technical Specifications
Product Type: Intrinsically safe temperature converter
Ex Certification: ATEX II 3G Ex nA IIC T4 Ga, IECEx Ex nA IIC T4 Ga (Zone 2 hazardous area)
Input Channels: 8 independent, galvanically isolated
Sensor Types: Thermocouples (J, K, T, E, R, S, B), RTD Pt100 (3-wire/4-wire) with sensor break monitoring
Measuring Ranges: Thermocouples: -200°C to +1800°C (type-dependent); Pt100: -200°C to +850°C
Accuracy: Thermocouple: ±0.1% FS; Pt100: ±0.05% FS
Outputs: 2-port industrial Ethernet (PROFINET or EtherNet/IP), data upload to PLC/SCADA
Galvanic Isolation: 2.5 kV (input to output), 500 V (channel to channel)
Supply Voltage: 24 V DC (19.2 - 28.8 V), ≤15 W power consumption
Diagnostics: Automatic open-circuit, short-circuit and overrange detection; alarms sent via Ethernet
Operating Temperature: -20°C to +60°C
Protection Rating: IP20 (module); must be used with RS-TB-Ex.SC or RS-TB-Ex.SP terminal base
Mounting: DIN rail (with compatible IS-RPI terminal base)
Intrinsically Safe Design
The module complies with ATEX and IECEx Ex nA standards, allowing direct installation in Zone 2 hazardous areas without additional safety barriers. Its key switch prevents mismounting of incorrect modules. The module must be used exclusively with a compatible RS-TB-Ex.SC or RS-TB-Ex.SP terminal base to maintain intrinsically safe backplane values and must not be used with other terminal base types. Unused terminals 36 and 49 must not be used as supporting terminals to avoid damage or unintended system operation. The cover plug for the backplane bus may only be removed when another terminal base is connected.
8-Channel Temperature Acquisition
The RSD-TI-EX8 processes eight independent temperature signals simultaneously. It supports a wide range of thermocouple types (J, K, T, E, R, S, B) as well as 3-wire/4-wire Pt100 RTDs, making it compatible with virtually all industrial temperature sensors. High-precision measurement accuracies of up to ±0.05% FS ensure reliable process data for critical control tasks.
Seamless Industrial Ethernet Integration
Two built-in industrial Ethernet ports support PROFINET and EtherNet/IP protocols, enabling real-time data upload to PLCs, DCS or SCADA systems. The integrated diagnostic function continuously monitors the module and sensors for open-circuit, short-circuit or overrange conditions, and automatically sends alarms to the control system, significantly reducing downtime and troubleshooting effort.
- User name Member Level Quantity Specification Purchase Date
- Satisfaction ：
-
-
ABB PFEA113 Tension Controller Troubleshooting Guide -
ABB PFEA111/112/122 Tension Controller Troubleshooting Guide -
ABB LS4000 laser analyzer -
ABB SPAU 341 C Voltage Regulator Troubleshooting Guide -
Analysis and Fault Diagnosis of ABB V-Contact VSC Medium Voltage Contactor -
ABB UNITOL 1020 Compact Digital Excitation Regulator AVR Replacement and Troubleshooting -
ABB UNITROL 1000 excitation system replacement and troubleshooting -
ABB SYNC HROTACT 5 synchronization module troubleshooting and replacement -
ABB SYNC HROTACT 5 Synchronization Device Replacement and Troubleshooting Guide -
ABB Symphony Plus Module Replacement and Upgrade Guide -
ABB S900 I/O Hazardous Area Deployment and Maintenance -
ABB System 800xA Operations and Troubleshooting -
ABB PCS6000 Troubleshooting and Module Replacement Guide -
ABB PCS 8000 pumped storage excitation -
ABB Procontrol P13 Bus Coupling Upgrade Guide -
ABB NextMove ESB-2 Fault Diagnosis and Configuration Practice -
ABB MEGADRIVE-LCI Maintenance and Selection Practice -
ABB MEGADRIVE LCI Transmission Vibration Suppression -
ABB MEGADRIVE LCI Water Cooling Troubleshooting and Maintenance Guide -
Practical Maintenance and Common Troubleshooting of ABB DCS880 -
ABB SDCS-IOB-3 Replacement and Troubleshooting -
ALSTOM MAE99-04 Serial Interface Terminal Panel Maintenance and Troubleshooting -
Installation and Maintenance of ALSTOM ALSPA MV3000 Handheld Operator -
Maintenance and commissioning of ABB KPM KB2 paper breakage detector -
Maintenance and troubleshooting of ABB SCC-K converter -
ABB SCC Gas Preprocessing System Maintenance and Selection Guide -
ABB NGC8209 gas chromatograph maintenance -
Maintenance and troubleshooting of ABB DCS DC speed controller -
ABB ASTAT Crane Controller Maintenance and Debugging Guide -
ABB ACS800 TIM foil IGBT -
ABB LS25 laser analyzer troubleshooting -
ABB REM54 motor terminal troubleshooting -
ABB REL670 distance protection and troubleshooting -
ABB SUE3000 switching device troubleshooting -
ABB REF630 feeder protection -
ABB REF620 (Relion 620 series) feeder protection and measurement device -
ABB E1B-A Circuit Breaker -
ABB FCU400-IR temperature measurement system troubleshooting -
ABB TZIDC-200 locator configuration and troubleshooting -
ABB DHH805-A Handheld Operator Configuration and Activation Guide -
ABB SACO 16D1 alarm device replacement and troubleshooting -
ABB 5SHY3545L0016 IGCT module replacement guide -
ABB S600 I/O Module Replacement and Troubleshooting Guide -
ABB NextMove e100 motion controller troubleshooting guide -
Rockwell PowerFlex 700 Inverter Replacement and Troubleshooting Guide -
Allen Bradley 1762-OW16 Output Module -
Allen Bradley IntelliVAC 1503VC Series E Control Module -
Allen‑Bradley IntelliVAC ™ 1503VC contactor control module -
Woodward SOGAV 250 solenoid valve drives gas intake valve for troubleshooting -
Woodward easyYgen-3500XT-P1 obstacle removal -
Woodward CPC-II electro-hydraulic current pressure converter -
UniOP ePALM10 Handheld HMI -
TMEIC TMdrive-30 frequency converter -
TEWS TVME200 Carrier Board Configuration and Troubleshooting Guide -
TDK Alpha 400 Power Troubleshooting Guide -
STUCKE SYMAP relay -
Deployment and troubleshooting of Softing CAN-AC2-PCI interface card -
Installation, Maintenance, and Troubleshooting of Siemens C7-623/624 -
Foxboro Compact 200 Series 16 Slot Bottom Plate Deployment and Maintenance Guide -
Foxboro 84F/84W Vortex Flow Meter Selection and Debugging Guide -
Foxboro E69F Converter -
Foxboro DCS Compact200 series RH916RB (16 slot horizontal bottom plate) -
Reliability Electric PSC7000 Control Card Troubleshooting and Maintenance -
Eaton MTL F809F Plus DTM Operating Instructions -
Motorola ACE3600 RTU Troubleshooting Guide -
MOOG D136-003-001 on-site deployment and troubleshooting -
Troubleshooting and Maintenance of Micro Panel GF1-10 Touchscreen -
Neles NDX Intelligent Valve Positioner Troubleshooting and Debugging -
Jamesbury VPVL Mod D Maintenance and Troubleshooting -
Jamesbury VPVL Pneumatic actuator selection and maintenance guide -
GMW IPP 144-40 GS Thermal Printer Troubleshooting Guide -
Meggitt C327845 Gas Shutoff Valve Troubleshooting and Replacement Guide -
Meggitt C422685 Gas Solenoid Valve Troubleshooting Guide -
LTI ServoOne Servo Troubleshooting Guide -
Jenaer Antriebstechnik ECOVARIO Servo Troubleshooting Guide -
Honeywell TDC3000X Troubleshooting Guide -
Honeywell NOTIFIER NFS2-3030 Troubleshooting Guide -
Troubleshooting of Honeywell FC series safety barriers -
Honeywell XL1404 Troubleshooting Guide -
Honeywell TDC 3000 Troubleshooting and Module Replacement Guide -
HIMA X-DI 64 01 Safety Module -
Hirschmann MICE MS20/MS30 Switch Integration and Troubleshooting -
EXOR ePAD05/ePAD06 button screen replacement and troubleshooting -
EXOR eVO58-TST/TNT Compact HMI Human Machine Panel -
Esd VME-PCM-CADDY/2 Carrier Board Integration and Troubleshooting Guide -
Elmo Gold Tuba Servo Drive Integration and Troubleshooting Guide -
Eaton COM-MPB1-TP/MPB2-TP communication module -
DeltaTau PMAC2 PCI Ultralite Programmable Multi Axis Motion Controller -
DATA PATTERNS DP-VME-5114 Dual PMC Carrier Board Integration and Troubleshooting -
CMZ SVM1608 Intelligent Servo Driver -
SUMITOMO T2100Z steel turning selection and troubleshooting -
SUMITOMO PSZ Turn Quick Change System Selection and Troubleshooting -
SUMITOMO EGU chip breaker selection and troubleshooting -
SUMITOMO GND slotting tool holder selection and troubleshooting -
SUMITOMO AC8000P steel turning selection and troubleshooting -
SUMITOMO AC6000M Stainless Steel Turning Guide -
SUMITOMO ELECTRIC AC5000S Heat Resistant Alloy Turning Guide -
SUMITOMO ELECTRIC AC4000K Cast Iron Turning Selection Guide -
SUMITOMO ELECTRIC AC1135U Small Parts Turning Application Guide -
SUMITOMO ELECTRIC AC1030U Precision Machining Selection and Practice for Small Parts -
CCS 6900G/P pressure switch -
BENDER WR Transformer Selection -
BENDER RCMA475LY Residual Current Monitoring -
BENDER IRDH575 Insulation Monitoring -
BENDER IRDH265 Insulation Monitoring and Debugging -
Bender RCMA475LY residual current monitor debugging -
Beckwith Electric M-3425A Generator Protection Relay Debugging Guide -
Automated MEX816U Expander Troubleshooting Guide -
ASEM HT2150 Industrial Tablet Selection and Troubleshooting -
Troubleshooting and practical application of Advantest U3771/3772 microwave spectrum analyzer -
Advantest R6144 Programmable DC Voltage/Current Source (Calibration Source) Calibration and Maintenance -
Aerotech UNIDEX 100/U100i single axis motion controller -
Aerotech Ndrive MP Ultra Compact PWM Digital Servo Driver -
Aerotech Ndrive HPe 10/20/30 High Performance PWM Digital Servo Drive -
Aerotech Ndrive HLe maintenance replacement -
Aerotech Ndrive CP maintenance replacement -
Aerotech Ndrive Linear Drive Selection -
Aerotech NDrive HL linear drive maintenance replacement -
Aerotech NDrive HP 10/20/30 Maintenance and Replacement -
Aerotech NDrive CP10 Servo Drive Guide -
SIGMATEK TAE1941 Display Unit Replacement and Troubleshooting -
SIGMATEK TAE151 Replacement and Troubleshooting -
SIGMATEK AKM Servo Motor Replacement and Troubleshooting Guide -
SIGMATEK S-DIAS Control System Replacement and Upgrade Guide -
SIGMATEK ETT Series HMI Replacement and Selection Guide -
SIGMATEK DIAS Drive 310-23 servo amplifier -
SIGMATEK CCP 521 C-DIAS processor module -
Megmeet L6 electric drive troubleshooting
