The HCS02.1E-W0028-A-03 and CSH01.1C-PB-ENS-MEM-MA1-S2-S-NN-FW together constitute a single-axis drive package within the Rexroth IndraDrive C platform. The HCS02 power section supplies the three-phase power conversion stage, while the CSH01 control section contributes the motion intelligence, communication interfaces, and functional safety layer. This division of labor allows each section to be specified independently, yet the two are engineered as a matched pair for coordinated operation inside the same drive family.
The HCS02.1E-W0028-A-03 is an IndraDrive C power module rated for three-phase mains input from 200 to 500 VAC at 50 or 60 Hz. It draws up to 13 A from the supply and delivers a three-phase output voltage range of 0 to 530 VAC with an output current capability of approximately 12 A. The output frequency extends to 1600 Hz, accommodating high-speed servo applications that require rapid electrical commutation. A short-circuit current rating of 42,000 A reflects the power section design intent for industrial cabinets where fault levels can be substantial. The control voltage input is 24 VDC, consistent with the auxiliary supply conventions used across the IndraDrive range.
The power module belongs to the IndraDrive C family, which is characterized by a compact, book-style mechanical format intended for cabinet mounting. The “W0028” designation in the type code identifies the power class within the HCS02 line, placing this module in a middle range that balances current delivery with cabinet footprint. The power section handles rectification, DC link stabilization, and inverter output, leaving the control section to manage modulation, feedback, and safety.
The CSH01.1C-PB-ENS-MEM-MA1-S2-S-NN-FW is an advanced control section for the IndraDrive platform. Its type code encodes several functional decisions. The PB segment specifies PROFIBUS-DP as the fieldbus interface, enabling cyclic and acyclic data exchange with a higher-level PLC or motion controller. The ENS segment indicates the encoder evaluation variant, which supports IndraDyn S motors and industry-standard feedback formats including 1 Vpp sinusoidal, Hiperface, EnDat 2.1, and 5 V TTL. This breadth of encoder compatibility allows the same control section to be paired with a range of MSK-series synchronous servo motors without changing the drive hardware.
The MEM segment points to expanded memory functionality within the control section, supporting parameter storage and program retention across power cycles. The MA1 multifunction module contributes two analog inputs and two analog outputs, each operating on a bipolar ±10 V range with 12-bit resolution. These analog channels are accessible through a D-Sub 15 female connector and are suitable for direct velocity or torque reference signals, as well as for scaled feedback to external monitoring equipment. The two reference outputs can source 5 V at 1 mA for external potentiometers.
The S2 segment in the type code denotes Safe Torque Off, a functional safety feature that cuts power to the motor without relying on external contactors. Safe Torque Off prevents unexpected restart in the event of a safety circuit interruption, contributing to machine-level risk reduction in accordance with common industrial safety architectures. The FW suffix indicates factory-loaded firmware, ensuring that the control section arrives with the appropriate motion control software already present.
When the HCS02 power section and the CSH01 control section are assembled, the resulting drive package occupies a single axis position in the cabinet. The control section manages the commutation of the power stage, processes encoder feedback for closed-loop position and velocity control, exchanges process data over PROFIBUS-DP, and enforces Safe Torque Off when the safety input is de-energized. The analog interface adds a parallel signal path for applications that require hardwired setpoints alongside the fieldbus.
The modular separation of power and control has practical consequences for engineering and maintenance. Power sections can be selected according to the current demand of the connected motor, while control sections can be chosen for the required fieldbus, encoder, and safety profile. In a multi-axis machine, this approach allows different axes to share the same power section type while receiving control sections configured for their individual feedback and communication needs.
The combination is oriented toward industrial automation tasks that require deterministic motion control with moderate power demand. Typical settings include packaging machinery, material handling axes, rotary indexing stations, and general-purpose servo positioning systems. The PROFIBUS-DP interface integrates the drive into plant architectures where this fieldbus is already established, while the encoder flexibility accommodates both absolute and incremental feedback strategies. The Safe Torque Off function aligns the package with machine safety concepts that demand reliable removal of torque without cycling the main power contactor.
From a specification standpoint, the HCS02.1E-W0028-A-03 and CSH01.1C-PB-ENS-MEM-MA1-S2-S-NN-FW package represents a configuration in which the power conversion and motion control responsibilities are explicitly allocated to purpose-built modules within the IndraDrive C ecosystem. The result is a drive axis that can be characterized by its input and output electrical ratings, its communication and feedback interfaces, and its integrated safety behavior, each traceable to the documented capabilities of the individual sections.



