The HMS01.1N-W0036-A-07-NNNN power section and the CSB02.1B-ET-EC-NN-S4-DA-NN-FW control section together form a single-axis drive package within the Rexroth IndraDrive M modular drive system. The power section provides the three-phase inverter stage and the thermal management components, while the control section provides the motion control electronics, communication interface, encoder evaluation, safety functions, and analog I/O. The two modules are mechanically and electrically matched to operate as one drive unit in an industrial cabinet.
The HMS01.1N-W0036-A-07-NNNN is an IndraDrive M power section in the 36 A class. The W0036 segment of the type code identifies the rated output current range, positioning the module for medium-duty servo axes. The A-07 segment specifies the cooling and connection variant, including the heat sink and fan arrangement used to dissipate the losses generated by the power semiconductors. The NNNN suffix indicates that no additional option modules are populated in the power section configuration.
The power section draws from the IndraDrive M common DC link and produces a controlled three-phase output for the servo motor. The output stage includes current sensing and protection functions that act on the inverter bridge to protect the drive and motor in the event of a fault. The module’s thermal monitoring provides diagnostic information to the control section, allowing the drive to limit current when the temperature approaches the specified threshold.
The CSB02.1B-ET-EC-NN-S4-DA-NN-FW control section adds the intelligence and communication layer to the drive package. The ET segment identifies the EtherCAT communication interface, which provides real-time Ethernet communication between the drive and a higher-level controller. EtherCAT supports cyclic exchange of command values and feedback data, allowing the drive to participate in a deterministic motion control network.
The EC segment specifies the encoder evaluation configuration. The control section processes motor feedback signals to determine rotor position and speed, and it uses this information for commutation and closed-loop control. The S4 segment indicates the Safe Motion safety function, which extends the drive’s safety capabilities beyond basic torque removal to include monitored stop and limited-speed functions. The DA segment adds analog I/O functions, providing analog inputs and outputs for supplementary setpoints or monitoring signals.
The NN segments indicate that certain optional slots are unpopulated in this configuration. The FW suffix confirms that the control section is factory-loaded with firmware, ensuring that the drive package arrives with a defined software baseline for the EtherCAT interface, encoder evaluation, safety functions, and analog I/O.
When assembled, the HMS01.1N-W0036-A-07-NNNN and CSB02.1B-ET-EC-NN-S4-DA-NN-FW form a drive unit that executes current, velocity, and position control for a single axis. The control section receives position commands over EtherCAT, processes encoder feedback, and generates the current setpoints for the power section. The power section converts the DC link voltage into the motor voltage and current, and it returns status information to the control section. The safety function monitors the drive state and enforces the configured safe motion limits when required.
The modular separation of power and control allows the power section to be selected according to the motor current requirement, while the control section is selected according to the communication interface, encoder type, safety profile, and analog I/O needs. In a multi-axis system, multiple drive packages can share the same DC link and communicate over the same EtherCAT network, simplifying cabling and coordination.
The HMS01.1N-W0036-A-07-NNNN and CSB02.1B-ET-EC-NN-S4-DA-NN-FW package is intended for industrial servo axes that require a 36 A power stage, EtherCAT communication, encoder feedback, Safe Motion S4, and analog I/O in a single drive assembly. Typical applications include packaging machinery, printing equipment, handling systems, and general automation axes where deterministic motion control and integrated safety are required. The package’s role is to provide a complete single-axis drive function within the IndraDrive M platform, combining power conversion, motion control, communication, and safety in a modular configuration.



