SRPE60A50 | General Electric Rating Plug Circuit Breaker

SRPE60A50 | General Electric Rating Plug Circuit Breaker

Product Description P/N: SRPE60A50 DESCRIPTION / SPECIFICATIONS Description The SRPE60A50 by General Electric is a rating plug designed for use with Spectra, Power Break, and Power Break II circuit breakers. Utilizing UL listed interchangeable rating plugs, it allows for adjustment or establishment of the long time trip point of the circuit breaker. 

The key benefit of the rating plug lies in its interchangeability across various permissible current ratings within a specific circuit breaker frame, offering flexibility in operational settings. Technical Specifications Part Number SRPE60A50 Manufacturer General Electric Family Spectra Series Amp 50 Category Rating Plug Type SRPE Information About SRPE60A50 The SRPE60A50 by General Electric serves as a rating plug specifically designed for integration with Spectra, Power Break, and Power Break II circuit breakers. These rating plugs, UL listed, enable the adjustment or establishment of the long time trip point within the circuit breaker. A significant advantage lies in their interchangeability across different permissible current ratings within a given circuit breaker frame. 

This flexibility allows for versatile operational configurations suited to varying electrical demands. Upon installation, the rating plug dictates the ampere rating of the breaker itself. Consequently, it is imperative for the installer to meticulously verify the suitability of the connected cable and/or bus bar ampacity. Compliance with the National Electric Code mandates that cable sizing aligns precisely with the ampere rating established by the rating plug. This meticulous alignment ensures operational safety and efficiency in electrical installations. The rating plug's functionality extends beyond mere adjustment, providing a crucial mechanism for setting and maintaining the circuit breaker's operational parameters over time. 

This feature is essential in environments where electrical loads may vary or where precise control over trip points is necessary for operational reliability. Manufacturer information General Electric (GE)is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Up to 1.26 GHz Pentium® III processor with 256 KB advanced  transfer cache  

• Up to 512 MB PC-133 SDRAM using a single SODIMM  

• Internal AGP SVGA controller with 4 MB display cache  

• 133 MHz system bus via Intel® 815E chipset  

• Dual Ethernet controllers supporting 10BaseT and 100BaseTX  interfaces  

• Optional PCI dual channel Ultra160 SCSI  

• Up to three (two with rear I/O support) PMC expansion sites  (IEEE-P1386 common mezzanine card standard, 5 V)  

• Up to 1 GB bootable flash on secondary IDE (optional)  

• Two 16-bit and two 32-bit programmable timers  

• 32 KB of nonvolatile SRAM  

• Software-selectable watchdog timer with reset  

• Remote Ethernet booting  

• Optional IDE hard disk drive  

• VME64 modes supported:  A32/A24/D32/D16/D08(EO)/MBLT64/BLT32  

• VMEbus interrupt handler, interrupter and system controller  

• Includes real time endian conversion hardware for littleendian and big-endian data interfacing (patent no. 6,032,212)  

• Enhanced bus error handling  

• Passive heat sink