Sigmatek CTO167 C-SLIDES Digital Output Module
The Sigmatek CTO167 C-SLIDES Digital Output Module with reference 12-007-167-O is an industrial output unit for automation systems. It is identified by the CTO167 model reference. The module belongs to the C-SLIDES family. It provides digital output channels for switching loads such as valves, lamps, contactors and small motors. The CTO167 communicates with the CPU module through the DIAS system bus. It is used in packaging machines, printing presses, injection molding machines and assembly stations.
Digital Output Function
A digital output module switches field devices on or off based on control commands. Each channel provides a voltage output or relay contact depending on the module type. The CTO167 is designed for industrial signal levels, typically 24 volts DC. Outputs may be short circuit protected and diagnostic capable. Status LEDs show the state of each channel. This helps technicians diagnose wiring and load problems quickly.
C-SLIDES Design
The C-SLIDES family is designed for compact and flexible automation. Modules can be combined with other DIAS components. The CTO167 uses a base terminal for mounting and connection. The module plugs into the base for easy replacement. Wiring can remain connected when the module is changed. This reduces downtime during maintenance. The terminal is designed for secure connections and clear labeling.
Integration with DIAS
The CTO167 communicates with the CPU module through the DIAS system bus. Data is exchanged in real time for fast control response. The module can be combined with digital input, analog and motion modules. This modular approach allows flexible machine design. The system supports diagnostics for module status and output faults. Faults are reported to the CPU and can be viewed in the LASAL environment.
Applications
The module is used in many industrial machines. Typical applications include packaging lines, printing presses, injection molding machines, textile equipment, woodworking machines and assembly stations. It is also used in handling systems, robotics and test benches. Typical output devices include solenoid valves, indicator lamps, small contactors and audible alarms.
Installation Notes
Installation should follow the system manual. Power should be switched off before mounting or wiring. The base terminal must be mounted securely on a DIN rail or panel. Load wiring should be routed away from signal cables where possible. Fusing should be provided for external loads. After installation, each output channel should be tested for correct operation.
Maintenance
Regular maintenance includes checking terminal tightness, LED indication and output condition. Dust and moisture should be kept away from the module. Faulty loads or wiring should be repaired promptly. The module can be replaced without rewiring the base terminal. Only qualified personnel should service the system.
Conclusion
The Sigmatek CTO167 C-SLIDES Digital Output Module 12-007-167-O is a reliable output solution for DIAS automation. It provides clear diagnostics, easy maintenance and flexible integration. Correct installation and maintenance help ensure stable machine operation.
