Sumitomo CNHM02-6090YA-87 NSNP Gear Motor
The Sumitomo CNHM02-6090YA-87 PA024242 NSNP Gear Motor is an integrated drive unit for industrial motion control. It combines an electric motor with a gear reducer. The CNHM02-6090YA-87 reference, PA024242 number and NSNP designation identify the motor and gearbox configuration. The unit is rated for 230 and 460V operation with currents of 1.12A and 0.56A. It provides high torque, stable speed reduction and reliable power transmission in compatible machinery.
Motor and Gearbox Combination
The motor converts electrical energy into rotation. The gearbox reduces speed and multiplies torque. This allows the unit to drive loads that require lower output speed and higher force. The integrated design simplifies mounting and alignment. It also saves space compared with separate motor and reducer arrangements. The 87 to 1 ratio provides strong reduction for applications that need slow, controlled output.
Electrical Ratings
The 230 and 460V ratings allow the motor to be used in different power systems. The current values of 1.12A and 0.56A indicate the load at each voltage. Users should confirm the available voltage, frequency and phase before installation. Electrical connections must match the motor nameplate and control equipment. Grounding is required for safety and stable operation. The NSNP designation identifies the mounting and configuration details.
Performance and Control
The motor can be controlled by a suitable starter or drive. Speed may be fixed or adjustable depending on the system. The gearbox ratio determines the final output speed and torque. Users should compare the required torque, speed and duty cycle with the unit rating. Overloading can cause overheating, gear wear or premature failure. The unit is designed for continuous duty and repeated starting and stopping.
Applications
Typical applications include conveyors, mixers, feeders, packaging machinery, material handling, pumps and production lines. The unit is suitable for industrial environments where reliable speed reduction and torque are required. It can be used in compatible systems where a replacement drive is needed. The compact design is useful where space is limited.
Installation Notes
Installation should follow the equipment manual. The mounting base should be stable and aligned. Couplings, belts or chains must be aligned to avoid extra load. Electrical connections should match the motor voltage, frequency and phase. Grounding is required for safety. After installation, check rotation direction before connecting the load. Abnormal noise or vibration should be investigated before operation.
Lubrication and Cooling
The gearbox requires correct lubrication. Oil type and level depend on the design and mounting position. The motor should have sufficient airflow for cooling. Dust, heat and moisture can reduce service life. In harsh environments, guards or enclosures may be needed. Seals should be checked for leaks. The motor should be kept clean and free from debris.
Maintenance
Regular maintenance includes checking oil level, leaks, noise, vibration and temperature. Worn seals should be replaced. Bearings and gears should be inspected during major service. Electrical terminals should be checked for tightness and signs of overheating. Following the service schedule helps maintain reliable operation and extends the life of the unit.
Conclusion
The Sumitomo CNHM02-6090YA-87 PA024242 NSNP Gear Motor is a robust drive unit for industrial motion. It provides controlled speed, increased torque and dependable power transmission. Correct selection, installation and maintenance help ensure long service life.
