Sumitomo CNHMS34110YB17 Gearmotor
The Sumitomo CNHMS34110YB17 Gearmotor is an integrated drive unit for industrial motion control. It combines a 3 HP electric motor with a gear reducer. The ratio is 17, and the output speed is 102.94 rpm. The unit is identified by the CNHMS34110YB17 model reference. It is used where controlled speed, high torque and reliable power transmission are required.
Motor and Gearbox Combination
The motor converts electrical energy into rotation. The gearbox reduces speed and multiplies torque. This allows the unit to drive loads that require lower output speed and higher force. The integrated design simplifies mounting and alignment. It also saves space compared with separate motor and reducer arrangements.
Performance and Control
The motor can be controlled by a suitable drive or starter. Speed may be fixed or adjustable depending on the system. The gearbox ratio determines the final output speed and torque. Users should compare the required torque, speed and duty cycle with the unit rating. Overloading can cause overheating, gear wear or premature failure.
Compatibility and Identification
The CNHMS34110YB17 reference is important for correct replacement. Mounting flange, shaft, key and electrical connections must match the machine. The gearbox output may be shaft mounted, flange mounted or foot mounted depending on configuration. Users should confirm these details before installation.
Applications
Typical applications include conveyors, mixers, feeders, packaging machinery, material handling, pumps and production lines. The unit is suitable for industrial environments where reliable speed reduction and torque are required. It can be used in new equipment or as a replacement in compatible systems.
Installation Notes
Installation should follow the equipment manual. The mounting base should be stable and aligned. Couplings, belts or chains must be aligned to avoid extra load. Electrical connections should match the motor voltage, frequency and phase. Grounding is required for safety. After installation, check rotation direction before connecting the load.
Lubrication and Cooling
The gearbox requires correct lubrication. Oil type and level depend on the design and mounting position. The motor should have sufficient airflow for cooling. Dust, heat and moisture can reduce service life. In harsh environments, guards or enclosures may be needed. Seals should be checked for leaks.
Maintenance
Regular maintenance includes checking oil level, leaks, noise, vibration and temperature. Worn seals should be replaced. Bearings and gears should be inspected during major service. Electrical terminals should be checked for tightness and signs of overheating. Following the service schedule helps maintain reliable operation.
Conclusion
The Sumitomo CNHMS34110YB17 Gearmotor is a robust drive unit for industrial motion. It provides controlled speed, increased torque and dependable power transmission. Correct selection, installation and maintenance help ensure long service life.
