Sumitomo PA225389 CNHM1-6095YC-EP-6 Gear Motor
The Sumitomo PA225389 CNHM1-6095YC-EP-6 TC-FXPA Gear Motor is an integrated drive unit for industrial motion control. It is identified by the PA225389 and CNHM1-6095YC-EP-6 references and the TC-FXPA motor designation. The unit is rated for 230 and 460V operation with currents of 3.06A and 1.53A. The NSNP designation identifies the mounting and configuration. The gear motor provides controlled speed, torque multiplication and reliable power transmission in compatible machinery.
Motor and Gearbox Combination
The motor converts electrical energy into rotation. The gearbox reduces speed and multiplies torque. This allows the unit to drive loads that require lower output speed and higher force. The integrated design simplifies mounting and alignment. It also saves space compared with separate motor and reducer arrangements. The TC-FXPA motor is designed for industrial duty and stable operation.
Electrical Ratings
The 230 and 460V ratings allow the motor to be used in different power systems. The current values of 3.06A and 1.53A indicate the load at each voltage. Users should confirm the available voltage, frequency and phase before installation. Electrical connections must match the motor nameplate and control equipment. Grounding is required for safety and stable operation.
Performance and Control
The motor can be controlled by a suitable starter or drive. Speed may be fixed or adjustable depending on the system. The gearbox ratio determines the final output speed and torque. Users should compare the required torque, speed and duty cycle with the unit rating. Overloading can cause overheating, gear wear or premature failure.
Applications
Typical applications include conveyors, mixers, feeders, packaging machinery, material handling, pumps and production lines. The unit is suitable for industrial environments where reliable speed reduction and torque are required. It can be used in compatible systems where a replacement drive is needed.
Installation Notes
Installation should follow the equipment manual. The mounting base should be stable and aligned. Couplings, belts or chains must be aligned to avoid extra load. Electrical connections should match the motor voltage, frequency and phase. Grounding is required for safety. After installation, check rotation direction before connecting the load.
Lubrication and Cooling
The gearbox requires correct lubrication. Oil type and level depend on the design and mounting position. The motor should have sufficient airflow for cooling. Dust, heat and moisture can reduce service life. In harsh environments, guards or enclosures may be needed. Seals should be checked for leaks.
Maintenance
Regular maintenance includes checking oil level, leaks, noise, vibration and temperature. Worn seals should be replaced. Bearings and gears should be inspected during major service. Electrical terminals should be checked for tightness and signs of overheating. Following the service schedule helps maintain reliable operation.
Conclusion
The Sumitomo PA225389 CNHM1-6095YC-EP-6 TC-FXPA Gear Motor is a robust drive unit for industrial motion. It provides controlled speed, increased torque and dependable power transmission. Correct selection, installation and maintenance help ensure long service life.
