THQP130 | General Electric 30 Amp 1/2" Circuit Breaker

THQP130 | General Electric 30 Amp 1/2" Circuit Breaker

Product Description P/N: THQP130 DESCRIPTION / SPECIFICATIONS Description The THQP130 is a 1-pole, 30 Amp circuit breaker from General Electric's THQP (Spacesaver) series, designed for residential applications. These breakers are half the width of standard models, optimized for smaller load centers to save space and cost effectively. They feature a plug-in connection type and operate at 120 Volts with an interrupting rating of 10,000 Amperes. 

 Technical Specifications Brand GE Type Type THQP Compact Voltage Rating 120/240 VAC Amperage Rating 30 A Frequency Rating 50/60 Hz Interrupt Rating 10 kA Frame Q-Line Trip Type Non-Interchangeable Thermal Magnetic/LI Number Of Poles 1 Phase 1 Actuator Type Pivot/Toggle Handle Connection Type Load Lug Wire Size 8 to 4 AWG Mounting Type Plug-In Temperature Rating 10 to 50 deg C Dimensions 3-9/32 in H x 1/2 in W x 2-3/8 in D Material Plastic Information About THQP130 

 The THQP130 is part of General Electric's THQP (Spacesaver) series, offering a compact solution for residential electrical systems. These breakers are designed to be half the width of standard models, which facilitates their use in smaller load centers, optimizing space and reducing costs. The THQP130 breaker is specifically engineered for compatibility with GE residential panels. Its plug-in design simplifies installation and maintenance tasks. Despite being narrower than standard breakers, it maintains identical functionality and reliability, meeting stringent CSA and UL safety standards. 

 With a robust interrupting rating of 10,000 Amperes, the THQP130 ensures effective protection against electrical faults, enhancing the safety and longevity of electrical systems in residential environments. Its compact dimensions of 3 inches in height, 0.5 inches in width, and 3 inches in length make it suitable for applications where space optimization is crucial, such as in modern residential constructions or renovations. Manufacturer information General Electric (GE) is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. GE is known for its innovations in technology, manufacturing, and infrastructure solutions. 

 IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

Features 

 Single-Slot Module 

 SNP/SNP-X Protocol (master, slave) 

 CCM Protocol (master, slave, peer) 

 RTU Modbus Protocol (slave only) 

 Supports connection to MS-DOS

 or Windows

 programming and configuration software package (monitor only) 

 12 Mhz, 80C186 Microprocessor 

 Two RS-422/RS-485 or RS-232 Serial Ports 

 CCM, RTU and SNP/SNP-X Available on Either or Both Ports 

 Simultaneous Communications on Both Ports (up to 9.6 Kbps, or 19.2 Kbps individually) 

 High Performance Access to PLC Memory 

 Three Status LEDs 

 Reset pushbutton 

 Soft Switch Configuration (no switches or jumpers) 

 No Battery Required