WOODWARD 26618 Governor Test Stand

WOODWARD 26618 Governor Test Stand

DESCRIPTION

The Electric Test Stand is a self-contained unit built to provide oil pressure, rotation, and heated oil to test most types of Woodward and other makes of governors. Internal circuits allow the operator to set a standard minimum speed of the drive motor and then regulate the speed through a potentiometer attached to the output of the governor being tested. All controls on the stand are conveniently located to permit efficient one-person operation.

The test stand permits the following checks and/or adjustments of the governor being tested: 

  Governor pump pressure 

  High speed and low speed stops 

  Air, oil, water, or electric safety shutdown devices 

  Pneumatic or hydraulic speed setting 

  Solenoid and ac/dc-motor speed setting  

  Droop setting 

  Terminal shaft range 

  Limiter and/or load control functions

  Electric/hydraulic actuators  

  Governor stability, as it is reflected by the test-stand drive 

  A check for major leaks 

  A facility for a technician to conduct a general check on governor assembly and operation 

Main Functions

Test Function: WOODWARD 26618 Governor Test Stand is able to simulate various loads and speed variations under actual working conditions, and conduct a comprehensive and accurate test on the governor. Through the test, the performance indexes of the governor can be evaluated, such as regulation accuracy, response speed, stability, etc.

Calibration function: The test bench also has a calibration function, which can accurately calibrate the governor to ensure that its working parameters meet the design requirements. During the calibration process, it can be adjusted and optimised according to actual needs to improve the performance and reliability of the governor.

Technical features

High precision: adopting advanced sensors and measuring technology to ensure the accuracy and reliability of the test results.

High degree of automation: integrated automation control system, realising automated operation and data acquisition in the testing process.

Modular design: the test bench adopts modular design, which is convenient for maintenance and upgrading. Meanwhile, it can be flexibly configured according to different testing requirements.

User-friendly: Equipped with intuitive operation interface and detailed operation guide, it is convenient for users to operate and use.

APPLICATIONS

• Simulation 

• Instrumentation 

• Industrial control 

• Process control and monitoring 

• Factory automation 

• Intelligent networked PLC controllers 

• Automated test 

• Data acquisition