National Instruments 6030E/6031E/6032E/6033E series

2. Physical and environmental parameters

Size: PCI device 17.5cm × 10.6cm (6.9in × 4.2in), PXI device 16.0cm × 10.0cm (6.3in × 3.9in);

Weight: 179-199g (6.2-7.0oz), slightly different due to model differences;

Working environment: temperature 0~50 ℃, humidity 10%~90% (no condensation), altitude ≤ 2000m;

Storage environment: Temperature -20~70 ℃, humidity the same as the working environment.

Calibration and Certification

1. Calibration requirements

Preheating time: Recommended 15 minutes (to ensure stable accuracy);

Calibration cycle: 1 year, supporting internal calibration (relying on onboard 5.000V reference source, temperature drift ± 0.6ppm/℃) and external calibration (reference voltage 6-9.999V);

Calibration storage: Calibration parameters are stored in EEPROM to ensure accuracy is maintained after power failure.

2. Compliance certification

Safety standards: comply with IEC 61010-1, EN 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1;

Electromagnetic compatibility (EMC):

Radiation: EN 55011 Class A (10m), FCC Part 15A (>1GHz);

Immunity: EN 61326:1997 A2:2001;

Regional certification: CE, C-Tick, FCC Part 15 (Class A), requiring the use of shielded cables to ensure EMC compliance.

Additional design details

Trigger function: Supports analog triggering (12 bit resolution, programmable hysteresis) and digital triggering. The trigger source can be selected from AI channel, PFI interface, or RTSI trigger line (7 PCI devices, PXI devices compatible with PXI trigger bus);

Power requirements: The I/O connector provides+4.65~+5.25V DC (1A), and the bus power supply needs to refer to the specific equipment manual (excluding external VCC power consumption);

Pin definition: The document contains detailed pin diagrams for four models (such as the 68 pin pin of 6030E and the 100 pin pin of 6031E), clarifying the signal types and grounding relationships of each terminal for easy wiring deployment.