ADLINK IMB-T10 Mini ITX Embedded Motherboard
F:
|
Au:FANS
|
DA:2026-07-28
|
416 Br:
|
🔊 点击朗读正文
❚❚
▶
|
Share:
In the field of industrial computing, the Mini ITX motherboard, with its compact size, low power consumption and rich I/O expansion capability, has become an ideal carrier for automatic control, edge computing and intelligent terminal devices. The Linghua Technology IMB-T10 embedded motherboard is based on the Intel Atom D2550 processor and NM10 chipset. It integrates dual gigabit Ethernet ports, 10 serial ports (including 1 configurable RS-232/422/485), VGA/HDMI/LVDS triple display output, PCI/PCIe/Mini PCIe multi expansion slots, and 14 digital I/O channels in a small space of 170mm × 170mm, designed specifically for industrial communication intensive applications. This article is based on the complete data manual of the motherboard, providing a comprehensive technical interpretation from the processor and memory architecture, display output combination, serial port and USB configuration, storage and expansion bus, network and audio characteristics, to power and environmental specifications. The article also provides selection suggestions, accessory matching, and comparative analysis with similar products, aiming to provide practical technical reference materials for system integrators and R&D engineers, helping them efficiently select and deploy in projects such as machine vision, multi serial gateway, and human-machine interface.
Power wiring: Do not use both screw terminals and 4-pin ATX at the same time, otherwise it may damage the circuit.
LVDS configuration: It is necessary to select single/dual channels according to the specifications of the LCD panel and set the jumper correctly, otherwise there may be no display or abnormal display.
Serial port mode switching: RS-232/422/485 is selected through jumper wires, and it is necessary to confirm that the actual wiring is consistent with the software settings (485 needs to be set with transmit and receive control).
Heat dissipation design: Even in fanless versions, the CPU heat sink still requires good air convection, cannot be completely sealed, and has no ventilation holes.
Mini PCIe sharing: If an mSATA module is inserted, the corresponding SATA II ports cannot be used simultaneously; If a USB module is inserted, an additional USB is available.