ABB Advant Controller 210

ABB Advant Controller 210

Product Overview: The Advant Controller 210 is a small, low-cost system in the Advant family that is configured and programmed via Advant Control Builder running on Windows NT. It integrates 10 binary inputs and 6 binary outputs, can be connected to a wide range of expansion units, and has a wide range of communication capabilities and functional features.

Functionality

Software Functions: Advant Control Builder provides a wide range of functions, including logic functions, PID adjustment, alarm handling functions, and communication with other systems.

Hardware Features: Compact design supports DIN rail mounting. Integrated digital I/O with removable screw terminals for power and I/O connections. Units with different I/O capacities are available to support various types of I/O devices, such as S200-E/A, S200L-E/A, S800-E/A, communication with other systems via RS232, and optional battery/real-time clock unit.

Hardware details

Central I/O system: 10 binary inputs and 6 binary outputs, rated voltage DC 24V, signals optically isolated, outputs short-circuit protected. External expansion units can be connected. The inputs are equipped with second-order low-pass filters.

Communication interface: Two RS232 channels are integrated and connected via RJ-45 connectors, one channel is equipped with full modem control signals, the other only with send/receive signals. The communication status is indicated by LEDs.

PROFIBUS-DP interfaces: CI724 as optional interface for connecting I/O units of the S800, S200 and S200L series with a transmission distance of 100 - 1200 m, CI274 as PROFIBUS-DP master, up to two installed.

Battery / real-time clock unit SB210: optional unit, powered by a lithium battery, capable of keeping the real-time clock running and storing the RAM contents for approx. one year. The battery should be replaced every year or when the voltage is too low.

Technical data

General parameters: Operating voltage DC 19.2 - 30V, current consumption varies between components. Isolation voltage AC 500V, operating temperature + 5°C to + 55°C, humidity 5 - 95% non-condensing, protection class IP20, CE and UL approved.

Central Unit (CPU): MC68332ACFC20 processor with 18.432MHz, 2MB RAM and 2MB Flash, various status indicators, support for different numbers of I/O units, real-time clock accuracy 100ppm.

Integrated I/O system: Inputs are of different types, with different electrical parameters and hardware filters. The outputs are clearly parameterised and protected against short-circuit and over-temperature.

Integrated communication channels: two RS232 channels with various protocols and baud rates, programmable data, parity and stop bits, cable length up to 15 metres.

PROFIBUS-DP interface unit CI274: DP master class 1, various transmission rates, status indicator, connection via 9-pin D-SUB connector.

Battery / real-time clock unit SB210: Li-ion battery 3.0V, 0.22Ah, real-time clock accuracy 100ppm.

Programming cable TK211: 9-pin D-SUB connector and 8-pin RJ-45 connector, length 3.0 metres.

Product models: PM210V0, PM210V04, PM210V08, PM210V16, corresponding to different I/O expansion capabilities.

Hardware specifications

Central unit (CPU)

Processor: Adopting MC68332ACFC20 processor with 18.432MHz, it can efficiently handle various control tasks and meet the real-time requirements of the system.

Memory: Equipped with 2MB RAM and 2MB Flash, which can store operating procedures, data and system configuration information.

Power supply interface: A removable 2-pin screw terminal block is used to connect to the DC 24V power supply, which is solidly connected and easy to install and maintain.

Status display: Green LED shows the status of power supply (PWR) and integrated communication channels, while red LEDs indicate the status of FAIL and STOP, so that users can keep abreast of the system's operating conditions.

I/O connectivity: Supports different numbers of I/O units, from 0 to 16 central I/O units depending on the controller type.

Real Time Clock: 100ppm accuracy (approx. 1 hour/year), records system operation time and ensures time accuracy in control scenarios involving time sequences.

Dimensions and Weight: Dimensions B 282 x H 131 x T 67mm, weight 725g (without packaging) or 1165g (with packaging), easy to install in various industrial control cabinets.

Integrated I/O System

Input Specifications

Number and Logic: 10 binary inputs with positive logic, 6 of which are equipped with fast hardware filters to effectively filter noise in the input signal and improve the stability of the input signal.

Electrical parameters: ‘1’ signal input voltage DC 15V min. - DC 30V max. (rated DC 24V), ‘0’ signal input voltage < DC 6.0V; different input channels have different input current requirements, and corresponding standards for input impedance. The input impedance is standardised accordingly, e.g. max. 3.7kΩ or 6.2kΩ for some channels.

Filter: The inputs are equipped with second-order low-pass filters with time constants from 0.5ms to 32ms, which can be set individually by the software to flexibly adjust the filtering effect to suit different industrial environments.