ABB BRC-300 Bridge Controller and Process Bus Adapter

ABB BRC-300 Bridge Controller and Process Bus Adapter

The Harmony Bridge Controller (BRC-300) is a high-perfor mance, high-capacity process controller. It is a rack controller designed to interface with both Harmony block I/O and Har mony rack I/O in the Symphony™ Enterprise Management and Control System. 

The controller is fully compatible with the INFI 90® OPEN system in functionality, communication and packaging. 

The controller collects process I/O, performs con trol algorithms and outputs control signals to process level devices. 

It also imports and exports process data of other con trollers and system nodes, and accepts control commands from operators and computers connected to the network. 

This instruction provides information about how the controller works, and how to install, configure, operate and troubleshoot the controller.

The controller is designed for redundancy (two controllers needed). 

This can be achieved while remaining connected to the Hnet or not

NOTES: 

The Harmony Bridge Controller BRC-300 is referred to as controller throughout this instruction.

The PBA-200 Processor Bus Adapter is referred to as PBA throughout  this instruction

Specification Model

Product Model: BRC-300

Manufacturer：ABB

Product type: Harmony Bridge Controller

Weight: approx. 2000g (including packaging etc., actual controller may be lighter)

Panel size: 35.56mm wide, 177.80mm high (1.4‘ wide, 7.0’ high)

Circuitry: Advanced surface mount technology with Non-Volatile Random Access Memory (NVRAM), Static Random Access Memory (SDRAM), 

Flash Memory (ROM), microprocessor running at 160MHz, Direct Memory Access (DMA) circuits, ABB customised bus circuits, redundancy circuits, 

and a variety of support circuits.

Performance Benefits

Powerful interface capabilities: 

Seamlessly interfaces with Harmony Block I/O and Harmony Rack I/O within the Symphony™ enterprise management and control system, 

and is fully compatible with the Infi 90® open system in terms of functionality, communications, and packaging.

Comprehensive data processing and control capabilities: Collects process I/O data, performs various control algorithms, 

and outputs control signals to process-level devices. At the same time, it can import/export process data from other controllers and system nodes, 

and receive control commands from networked operators and computers.

Excellent hardware performance: 160MHz microprocessor with various types of memory ensures high-speed data processing and storage; 

supports various communication methods such as Hnet communication, I/O expansion bus, serial channel and station link; 

with redundant design, redundant controllers are connected through cables, 

and the control can be switched seamlessly in the event of the main controller failure.

Rich language support: support for a variety of control languages, including C language and function code (FC), 

which is convenient for engineers to develop according to different application scenarios and programming habits.

Precautions

Installation environment: 

It should be installed in a dry, well-ventilated environment where the temperature and humidity are in line with industrial standards to avoid dust, 

corrosive gases, etc. affecting the performance and life of the equipment.

Redundancy Configuration: 

In redundancy configuration, it is necessary to ensure that the configuration of the two redundant modules is identical, 

otherwise it may lead to switching anomalies and other problems.

Communication connection: 

When connecting with other devices, wiring should be carried out in strict accordance with the interface specifications 

nd cable requirements to prevent communication failures caused by wiring errors.

Software programming: 

When writing the control programme, the resource limitations of the controller should be fully considered, 

so as to avoid overly complex procedures leading to too high a load on the controller and affecting the real-time control performance.

Related Models

Related models of BRC-300 include BRC100, etc. BRC-300 can fully cover BRC100 in terms of functional characteristics, for example, 

BRC-300 adopts more advanced 32-bit microprocessor with higher processing speed; in terms of redundancy design, 

BRC-300's redundant controllers can achieve seamless switching, with higher usability and fault-tolerance; 

and the use of surface-mounting technology in BRC-300 can be used to improve the performance of real-time control. 

300‘s redundant controllers can be switched seamlessly for better availability and fault tolerance. 

The BRC-300’s surface mount technology further enhances reliability and integration.

Application Scenarios

Industrial automation production line: 

It can be used to control the operation of various types of equipment on the production line, such as starting and stopping the motor, adjusting the speed, 

and controlling the opening of valves, etc., so as to realise the automated process control of the production line, 

and to improve the production efficiency and product quality.