ABB IGBT MODULE KIT FS300R17KE3/AGDR-76C S 68569362

ABB IGBT MODULE KIT FS300R17KE3/AGDR-76C S 68569362

Product overview

FS300R17KE3/AGDR-76C S is a high-performance IGBT module kit launched by ABB, with product number 68569362. This kit integrates Infineon's advanced high-voltage IGBT chips with ABB customized driver boards, designed specifically for medium to high voltage and high-power scenarios. It features high voltage tolerance, high reliability, and efficient conversion, and is widely used in industrial transmission, new energy, and high-end equipment fields.

Core components:

IGBT module (FS300R17KE3): using Infineon E3 technology platform, supporting 1700 V high voltage and 300 A rated current, suitable for industrial scenarios that require high voltage isolation, such as medium voltage converters, power electronic transformers, etc.

Drive board (AGDR-76C): ABB's drive solution designed specifically for high-voltage IGBT, integrating multi-level protection circuits (overcurrent, overheating, gate voltage monitoring), supporting optocoupler isolation and digital signal input, with strong anti-interference ability, ensuring stable operation of the module in harsh environments.

Product specifications

Power parameters:

IGBT module:

Rated voltage (Vces): 1700 V

Rated current (Ic, RMS): 300 A

Pulse current (Icm): 600 A (10 ms pulse width, duty cycle ≤ 1%)

Saturation voltage drop (Vce (sat)): Typical value 2.2 V (@ Ic=300 A, Tj=25 ° C)

Driver board:

Power supply voltage:+15 V DC (on)/-7 V DC (off), isolated power supply design

Signal input: Optocoupler isolation, compatible with 3.3 V/5 V TTL signals, supports programmable dead time (0.5-5 μ s)

Protection functions: DESAT short circuit detection (response time<1 μ s), over temperature protection (OT, threshold 150 ° C), gate undervoltage protection (UV, detection voltage<10 V)

Physical characteristics:

Weight: The net weight of the kit is approximately 2.3 kg (including modules and driver boards).

Size:

Module size: 160 mm x 65 mm x 20 mm (length x width x height)

Driver board size: compatible with module design, supports rail installation or direct fixation to heat sink, with dimensions of 120 mm × 80 mm × 30 mm

Heat dissipation design:

Thermal resistance (Rth (j-c)): 0.055 K/W (from junction to shell), recommended to be paired with water-cooled radiators (such as ABB original water-cooled plates) or high wind speed air-cooled systems (wind speed ≥ 10 m/s) to ensure junction temperature ≤ 125 ° C.

Application Fields

Medium and high voltage industrial transmission:

Medium voltage frequency converter: compatible with ABB ACS580MV series, drives 250-400 kW medium voltage motors (such as fans in cement plants and rolling mills in steel plants), supports direct torque control (DTC) and grid harmonic suppression (THD<3%).

Power Electronic Transformer (PET): Used for AC/DC voltage conversion in smart grids, supporting efficient energy conversion from 10 kV input to 400 V output, and adapting to the needs of distributed energy grid connection.

Static Var Compensator (SVC): Used in the steel and chemical industries for dynamic reactive power compensation and voltage stability, it improves the power factor of the power grid to above 0.95.

New energy and power grid:

Photovoltaic inverter (centralized): suitable for large photovoltaic power stations (1 MW or more) with 1500 V DC bus, achieving high voltage input