ABB IGBT MODULE KIT FS450R17KE3/AGDR-71C S 68569591

ABB IGBT MODULE KIT FS450R17KE3/AGDR-71C S 68569591

Product overview

FS450R17KE3/AGDR-71C S is a high-performance IGBT module kit launched by ABB, with product number 68569591. This kit integrates Infineon's advanced 1700 V high-voltage IGBT chips with ABB customized driver boards, designed specifically for medium to high voltage and high-power scenarios. It features high voltage tolerance, high reliability, and efficient conversion, and is widely used in industrial transmission, new energy, and high-end equipment fields.

Core components:

IGBT module (FS450R17KE3): using Infineon E3 technology platform, supporting 1700 V rated voltage and 450 A rated current, with low saturation voltage drop and high short-circuit withstand capability, suitable for high voltage scenarios such as medium voltage converters and energy storage systems.

Drive board (AGDR-71C): A specialized drive board designed by ABB, integrating multiple protection functions such as overcurrent, overheating, and gate voltage monitoring. It supports optocoupler isolation signal input and has strong electromagnetic interference resistance, ensuring stable operation of IGBT modules under high-frequency switching.

Product specifications

Power parameters:

IGBT module:

Rated voltage (Vces): 1700 V

Rated current (Ic, RMS): 450 A

Pulse current (Icm): 900 A (10 ms pulse width, duty cycle ≤ 1%)

Saturation voltage drop (Vce (sat)): Typical value 2.1 V (@ Ic=450 A, Tj=25 ° C)

Driver board:

Power supply voltage:+15 V DC (on)/-7 V DC (off), isolated power supply design

Signal input: Optocoupler isolation, compatible with 3.3 V/5 V TTL signals, input impedance ≥ 10 k Ω

Protection response time: Over current protection (DESAT)<1 μ s, over temperature protection (OT) threshold 150 ° C

Physical characteristics:

Weight: The net weight of the kit is approximately 2.5 kg (including modules and driver boards).

Size:

Module size: 165 mm x 70 mm x 22 mm (length x width x height)

Driver board size: compatible with module design, supports compact installation, with dimensions of 130 mm × 90 mm × 35 mm

Heat dissipation design:

Thermal resistance (Rth (j-c)): 0.04 K/W (junction to shell), recommended to be paired with a water-cooled radiator or a high wind speed air-cooled system (wind speed ≥ 12 m/s) to ensure junction temperature ≤ 125 ° C.

Application Fields

Medium and high voltage industrial transmission:

Medium voltage frequency converter: compatible with ABB ACS580MV series, drives 350-500 kW medium voltage motors (such as mine hoists and chemical compressors), supports direct torque control (DTC) and multi motor synchronous control.

Power Electronic Transformer (PET): Used for voltage conversion in smart grids, supporting 10 kV input to 400 V output, suitable for distributed energy grid connection and microgrid scenarios.

Static Synchronous Compensator (STATCOM): Provides dynamic reactive power compensation in the power grid, suppresses voltage fluctuations, and improves power quality. It is suitable for scenarios such as photovoltaic power plants and data centers that require high grid stability.

New energy and energy storage:

Centralized photovoltaic inverter: Suitable for 1500 V DC bus, used in large ground power stations (over 10 MW) to achieve efficient MPPT tracking and low harmonic grid connection (THD<2%) under high voltage.