Welcome to the Industrial Automation website!

Product
Article
NameDescriptionContent
XING-Automation
E-mail  
Password  
  
Forgot password?
  Register
HOME ⊙ ABB ⊙ ABB IMDSI14 Digital Input Modules
当前位置：

ABB IMDSI14 Digital Input Modules

F: | Au:FAN | DA:2025-05-10 | 304 Br: | 🔊 点击朗读正文 ❚❚ ▶ | Share:

ABB  IMDSI14 Digital Input Modules

The IMDSI1 Digital Input modules provide 16 separate digital signals into the INFI 90® OPEN system for processing and monitoring. It interfaces process field inputs with the INFI 90 OPEN Strategic Process Management System.

A contact clo sure or switch is an example of a device that supplies a digital signal. Control modules provide the control functions; I/O modules provide the inputs and outputs. 

Four variations of the IMDSI1 modules are presented in this instruction:

• IMDSI12 - 24 VDC, 48 VDC, 125 VDC or 120 VAC inputs.
• IMDSI13 - 24 VDC inputs.
• IMDSI14 - 48 VDC inputs.
• IMDSI15 - 125 VDC or 120 VAC inputs.
The IMDSI12 is the functional equivalent of the existing IMDSI02 module with the restriction that the IMDSI02 offers selectable debounce filter times of 1.5 milliseconds (fast) and 17 milliseconds (slow) and the IMDSI12 module offers only the 17 milliseconds (slow) debounce filter time. The slow debounce filter is used in the majority of digital input applications.
Any of the IMDSI1 modules may be substituted in place of an IMDSI02 where appropriate jumper settings are used. For example, an IMDSI13 module may be substituted for an IMDSI02 module that has all its jumpers set for 24 VDC with a slow debounce filter. Figure 1-1 shows the INFI 90 OPEN communication levels and the position of the digital input modules within these levels. 

This section explains the inputs and input circuitry, control logic, logic power and connections for the IMDSI1 Digital Input modules. The DSI is a digital input interface to a multi-function processor (MFP), multi-function controller(MFC), or logic master module (LMM).
These control modules provide the control functions. A control module communicates with its I/O modules on a I/O expander bus as shown in Figure 1-1. Each I/O module on the I/O expander bus has a unique address set by address dipswitch S1 (Fig. 2-1) Digital field inputs are voltages of 24 VDC, 48 VDC, 125 VDC or 120 VAC rms. These voltages indicate an energized (ON) field device; a 0 volt input indicates a de-energized (OFF) field device.
The DSI have a fixed input debounce filter for DC inputs to allow for contact debounce time (17 millisecond response time).
The IMDSI13 (+24 VDC) module and the IMDSI14 (+48 VDC)module have a fixed configuration and do not require any jumper selections. The IMDSI15 (+125 VDC/120 VAC) module has jumpers to select DC or AC mode. The IMDSI12 (+24, +48,+125 VDC or 120 VAC) module has jumpers to select the DC or AC mode and jumpers to select the working voltage. Refer to the Installation section for an explanation of the jumper con nections.
NOTE: Due to the number of pins on the P3 connector, twelve inputs are separate while the remaining two pairs share input termi nals.
The positive (+) side of point 7 and 8 are tied together in each group (refer to Table 5-3). These points must use the same contact voltage (24 VDC, 48 VDC, 125 VDC or 120 VAC) set by the jumpers on the IMDSI12 module, or according to the relevant IMDSI1 mod ule working voltage
Figure 2-1 is a block diagram illustrating signal flow through the module. The input isolation block consists of current limit ers and optocouplers to isolate the 16 field inputs from the module circuitry. The input circuits provide 1500 VDC isola tion between input and logic circuitry and other input chan
nels. Refer to Table 1-5.


Digital input high impedance provides additional (passive) pro tection from high energy transients of field digital inputs Figure 2-1.  Digital Input Module Block Diagram Input signal path and low isolation capacitance allow protec tion against fast transient-burst disturbance.

The threshold detection block circuits test the input voltage to determine if it is at the proper voltage level to indicate an ON or OFF state. The output of this comparator is sent to a read buffer in the control logic block. If an input is energized, it also causes a corresponding input status LED on the front panel to light.
The control logic block consists of buffers that hold the input and status byte values. The I/O expander bus interface allows the control module to read these bytes
When an input signal is present at the proper voltage level, a zener diode conducts (turns on) to cause current flow through an optocoupler. Configurable jumpers (on IMDSI12) or fixed resistors (on IMDSI13, IMDSI14 or IMDSI15) select the turn-on threshold and input voltage.
The optocoupler output causes a comparator output to go low.
This lights a corresponding status LED on the module front panel to indicate an energized input; the I/O expander bus interface transmits a logic 1 to the control module on the I/O expander bus.
When no input signal is present, no current flows through the optocoupler. The front panel LED does not light and the DSI transmits a logic 0 on the bus. Figure 2-2 shows the digital input circuit.  
NOTE: The components inside the dashed boxes in Figure 2-2 are mounted only on the module versions stated in the note.

IMDSI14 | ABB | Digital Slave Input Module

  • LTi SO84.450 Servo Drive Controller - 450A Three-Phase BG7
  • LTi SO84.375 Servo Drive Controller - 375A Three-Phase BG7
  • LTi SO84.325 Servo Drive Controller - 325A Three-Phase BG7
  • LTi SO84.250 Servo Drive Controller - 250A Three-Phase BG7
  • LTi SO84.170 Servo Drive Controller - 170A Three-Phase BG6a
  • LTi SO84.143 Servo Drive Controller - 143A Three-Phase BG6a
  • LTi SO84.110 Servo Drive Controller - 110A Three-Phase BG6
  • LTi SO84.090 Servo Drive Controller - 90A Three-Phase BG6
  • LTi SO84.072 Servo Drive Controller - 72A Three-Phase BG5
  • LTi SO84.060 Servo Drive Controller - 60A Three-Phase BG5
  • LTi SO84.045 Servo Drive Controller - 45A Three-Phase BG5
  • LTi SO84.032 Servo Drive Controller - 32A Three-Phase BG4
  • LTi SO84.024 Servo Drive Controller - 24A Three-Phase BG4
  • LTi SO84.020 Servo Drive Controller - 20A Three-Phase BG3
  • LTi SO84.016 Servo Drive Controller - 16A Three-Phase BG3
  • LTi SO84.012 Servo Drive Controller - 12A Three-Phase BG2
  • LTi SO84.008 Servo Drive Controller - 8A Three-Phase BG2
  • LTi SO84.006 Servo Drive Controller - Three-Phase 230-480V 6A
  • LTi SO84.004 Servo Drive Controller - Three-Phase 230-480V 4A
  • LTi SO82.004 Servo Drive Controller - Single-Phase 230V 4A
  • HMS Anybus AB7646-F Gateway Manual
  • Schneider ATV930D75N4 Inverter Manual
  • Mitsubishi Q2ASHCPU-S1 System Manual
  • Fanuc A20B-3300-0319 Board Specification
  • Mitsubishi QD60P8-G Counter Module Guide
  • Nidec Unidrive M701 Inverter Manual
  • ABB AO895 Analog Output Module Guide
  • Mitsubishi Q2ASHCPU Controller System Manual
  • ABB Pluto S20 v2 Safety PLC Manual
  • Omron CJ1W-NC413 Position Module Manual
  • B&R X20AI4632 Analog Input Module 4 Channel
  • OMRON CS1G-CPU44H Ver. 4.1 CPU Unit PLC
  • Beckhoff EL2911-2200 TwinSAFE Logic Terminal for EtherCAT
  • Mitsubishi 2D-TZ368 Parallel I/O Interface Card
  • Mitsubishi A3ACPU PLC CPU Module for MELSEC A Series
  • Mitsubishi NF630-SEW 4P Adjustable Circuit Breaker 300-630A
  • Keyence XG-8700L Multi-camera Vision System for Inspection
  • Beckhoff C6017-0010 Ultra Compact Industrial PC
  • B&R 3AT660.6 PLC Module from Automation Panel Series
  • GE F31X300CCHALG2 PC Board with 531X133PRUAPG1 Card
  • STMicroelectronics STM32L100R8T6ATR MCU Arm Cortex-M3
  • Omron CS1W-CLK13 Controller Link Unit
  • Schneider BMENOC0301 Ethernet Communication Module
  • HELUKABEL Braids PLC-30 40 E2UK Braided Cable Sleeve
  • Pe323 h0102de323a0 PLC I/O Module
  • Mitsubishi GT2512-STBA GT2512-STBD HMI 12.1 Inch Touch Screen
  • Samsung LTM213UP01 21.3 Inch LCD Monitor Panel
  • Allen-Bradley 440R-W23219 Guardmaster Safety Relay
  • Beckhoff EL2535 EtherCAT Terminal PWM Output
  • HELUKABEL Braids PLC-40 55 E2UK Braided Cable Sleeve
  • Allen Bradley 1769-OB16 16-Point Sourcing Output Module
  • Balluff BES 516-604-DZ-3 Delay Safety Relay for Industrial Timing
  • Siemens 6GK7542-1AX10-0XE0 PROFIBUS Communication Module for S7-1500
  • GE IC693BEM340 FIP Controller for Series 90-30 PLC
  • OMRON C200HG-CPU63-E Programmable Logic Controller CPU Unit
  • Schneider EOCR-PMZ Relay Manual
  • Honeywell C36TC0UA21D0 Controller Specifications
  • Emerson Ovation VE4001S2T2B4 Input Module
  • Omron CJ1M-CPU22 CPU Specifications
  • Grundig NEA02 AES 0 Card Specifications
  • Omron CJ1W-AD081-V1 Analog Input Specifications
  • IDEC FS1A-C21S Safety Controller Manual
  • IFM O3D303 Smart 3D Sensor Specifications
  • Siemens 6SN1123-1AB00-0BA2 Power Module Guide
  • B&R 4PP035.0300-01 Power Panel Manual
  • Siemens 6ES7 153-2BA10-0XB0 IM Module
  • Beckhoff EL3356-0010 Analog Input Module
  • Siemens 3RW4037-1BB04 Soft Starter
  • Lenze EVF8216-E VFD
  • Mitsubishi GT2310-VTBA GT2310-VTBD HMI
  • Allen-Bradley 1764-28BXB PLC MicroLogix 1500
  • SP-RDM2 Relay Module Dual Reader Interface
  • Keyence GC-S84 Programmable Safety Controller
  • Mitsubishi GT2310-VTBA GT2310-VTBD HMI 10.4 Inch
  • Eurotherm MINI8 PLC Temperature Controller
  • Mitsubishi GT2512-STBA GT2512-STBD HMI 12.1 Inch
  • ABB ACS380-040S-02A6-4 VFD 0.75kW 480V
  • Dage PC514 ISSUE A PLC O.P.I Board
  • ROBICON 460T46.01 REV C Printed Circuit Board
  • Omron NX502-1300 Controller Unit NX5 CPU
  • B&R X20CM0985 PLC Module
  • Banner XS26-2DE 85064 Safety Controller
  • Siemens 3SK2122-1AA10 Safety Relay
  • HMS Anybus AB7646-F Gateway PROFIBUS EtherNet/IP
  • Siemens 6SN1118-0DM11-0AA0 SIMODRIVE 611 Card
  • Siemens C98043-A7001-L2-4 CUD1 Control Board
  • Stein Sohn E 083.1 PLC Rack Module 0010026-054100A
  • Allen Bradley 800H-2HA7P Push Button Station
  • Schneider BMXNRP0200 M340 PLC Module
  • KEPCO BOP 200-1M Bipolar Power Supply Amplifier
  • Mitsubishi Q2ASHCPU PLC Module with A1SX42 A1SY42 QC24-R2 A1SD75P2-S3
  • Siemens Siprotec 7SJ61 Overcurrent Protection
  • Keyence LJ-V7000 Controller Laser Profiler
  • Siemens 6EP3437-8SB00-0AY0 Power Supply 20A
  • Pasaban MC-2006 03 CAN Bus PLC Card
  • ETAS ES600.2 PLC Module Prototyping
  • ABB ACS800-01-0005-3+P901 Frequency Converter
  • Omron NX102-1100 PLC Module Machine Automation
  • Square D BMXCPS3500 PLC Power Supply Module
  • Allen-Bradley 96657704 Fiber Optic Converter 1771-AF
  • Corcom 20VK1 Power Line Filter
  • Novellus 2805-11407 PLC Rack Assembly
  • Sick RLY3-EMSS100 Safety Relay Module
  • Microchip PIC12F508-I/P Microcontroller
  • Fanuc A02B-0098-B511 Motherboard
  • Merlin Gerin PB80 PLC Rack Module
  • ABB Pluto S20 V2 CFS Safety PLC
  • Honeywell TK-PRR021 Redundancy Module
  • B&R 7XX419L.50-1 Bus Controller
  • Mitsubishi NV400-SW 3P 300A Breaker
  • B&R X20AT2222 Temperature Module
  • Corcom 20VK1 EMI RFI Filter
  • Novellus 2805-11407 PLC Rack Assy
  • Mitsubishi FXAOM01BD Analog Output Module 4CH
  • NORIS A1-91 PCB Rack Module A1-91-4 A1-91-5 A1-91-6 A1-91-7 A1-91-8
  • Omron ZFV-SC50 Smart Camera Vision Sensor
  • Schneider Electric EOCR-PMZ Motor Protection Relay
  • B&R X20 SO 6300 PLC Module Safety Output
  • Mitsubishi A2ACPU21-S1 CPU Module MELSEC
  • Siemens 6ES7405-0KA02-0AA0 PS405 10A Power Supply
  • Samsung PVU-2424 Power Supply Unit DC24V 24W
  • ATTO controlSYS ATT0-CPU44 PLC with Display
  • Lenze EPZ-10203 CANPT010W3E Absolute Encoder
  • GE IS215WEMAH1A+IS210BPPBH2CAA Mark VIe Embedded Processor and Backplane Power Distribution Board
  • GE IS215AEPAH1CH+IS210BPPBH2CAA Mark VIe Application Processor and Backplane Power Distribution Board
  • GE IS215WECAH1B+IS210BPPBH2CAA Mark VIe Control Platform
  • GE PCM Regulator for EX2100e Power Conversion Module 151X1235DB15SA1
  • Lenze ECSEA048C4B servo drive