MOTIONLINK status screen: Detailed display of enable status, fault history, and various protection settings.
Error codes: Divided into fatal faults (stopping almost all functions), non fatal faults (disabling drivers), and warnings. Error messages (ERR) and history records (FLTHIST) can be viewed through the serial port.
Common faults include overheating, overvoltage/undervoltage, overcurrent, feedback loss, overspeed, power failure, EEPROM error, etc. Most faults can be reset by switching to Remote Enable, but severe faults such as power level overcurrent require power cycling.
9.3 Firmware Upgrade
The firmware of the drive can be upgraded on-site using the Ignite. exe tool via serial port. Before upgrading, the driver needs to be disabled. After upgrading, the power supply needs to be cycled and the motor compensation file or user configuration file needs to be reloaded.
