SIEMENS SMART S7-200 Intelligent Programmable Controller

SIEMENS SMART S7-200 Intelligent Programmable Controller

Product positioning and core advantages

Siemens SIMATIC S7-200 SMART is a miniature PLC (Programmable Logic Controller) designed specifically for developing markets, with the core goal of balancing performance and cost, providing a cost-effective solution for small automation equipment. Key advantages include:

High speed processing performance: Equipped with Siemens dedicated chips, the basic instruction execution time is as low as 0.15 μ s, which is superior to micro PLCs of the same level and can cope with complex and fast control processes.

Flexible expansion capability: Provides two types of CPUs: standard (expandable I/O modules and signal boards) and compact (integrated I/O, non expandable), adapted to different point requirements.

Convenient communication and operation: Equipped with Ethernet and RS485 dual interfaces as standard, it supports fast program/firmware updates for general Micro SD cards, reducing on-site maintenance difficulty.

Seamless integration solution: Perfectly compatible with Siemens BASIC LINE HMI and SINAMICS V20/V90 drivers, forming a complete micro automation system.

CPU module classification and key parameters

2.1 Classification of CPU Types

Type Series Core Features Representative Models

Standard SR series AC/DC/relay output, supports I/O expansion+signal board SR20, SR30, SR40, SR60

Standard ST series DC/DC/transistor output, supporting high-speed pulse (PWM/PTO) ST20, ST30, ST40, ST60

Compact CR series AC/DC/relay output, non expandable, lower cost CR40, CR60

2.2 Comparison of Core Parameters (Key Models)

Parameter SR20 (Standard) ST30 (Standard) CR40 (Compact)

The number of I/O points in the main body is 12DI/8DO, 18DI/12DO, 24DI/16DO

Maximum I/O capacity (including expansion) 212 points, 222 points, and 40 points (non expandable)

High speed pulse output -3 channels at 100kHz-

High speed counter (single-phase) 4-channel 200kHz 4-channel 200kHz 4-channel 100kHz

Real time clock support (7 days of power failure) support (7 days of power failure) not support

Number of expansion modules: 6, 6, 0

Power type AC 85-264V DC 20.4-28.8V AC 85-264V

Expansion components (signal board and expansion module)

3.1 Signal board (SB): directly installed on the front of the CPU without occupying cabinet space

Model Function Description Key Parameters Order Number (MLFB)

SB DT04 Digital I/O Expansion 2DI/2DO (Transistor Output) 6ES7288-5DT04-0AA0

SB AE01 Analog Input Extension 1AI (12 bit accuracy, supporting ± 10V/0-20mA) 6ES7288-5AE01-0AA0

SB AQ01 Analog Output Extension 1AO (12 bit accuracy, supporting ± 10V/0-20mA) 6ES7288-5AQ01-0AA0

SB CM01 communication extension supports RS232/RS485 conversion, with 4 devices connected to 6ES7288-5CM01-0AA0

SB BA01 battery module compatible with CR1025 battery, clock endurance of about 1 year 6ES7288-5BA01-0AA0

3.2 Expansion Module (EM): Used for extensive I/O expansion or special functions

Module type, model, function, key parameters

Digital input EM DI08 8-channel digital input 24V DC, filtering time adjustable from 0.2-12.8ms

Digital output EM DR08 8-channel relay output supports 5-30V DC/5-250V AC, 2A per point

Digital output EM DT08 8-channel transistor output 24V DC, 0.75A per point, surge current 8A

Analog input EM AI04 4-channel analog input with 12 bit accuracy, supporting ± 10V/0-20mA

Analog output EM AQ02 2-channel analog output with 12 bit accuracy, load resistance ≥ 1k Ω (voltage)

Temperature acquisition EM AR04 4-channel RTD input (platinum resistance) accuracy ± 0.1 ℃, cable length ≤ 100m

Temperature acquisition EM AT04 4-channel thermocouple input supports K/J type, cold junction error ± 1.5 ℃

Bus Expansion EM DP01 PROFIBUS DP Slave Module Supports 9.6kbps-12Mbps, Maximum 244 Byte I/O

Core functional characteristics

4.1 Communication Capability

Standard interface:

Ethernet interface: Supports Siemens S7 protocol, can download programs, connect HMI (up to 8 units), communicate with other CPUs, supports 8 active GET/PUT connections+8 passive GET/PUT connections, transmission rate 10/100Mbps (CAT5e shielded wire).

RS485 interface: Supports Modbus RTU, PPI, USS protocols, can connect to third-party devices such as frequency converters and touch screens, with a maximum of 4 HMIs per port.

Expansion interface: Add RS232/RS485 through SB CM01, compatible with barcode scanners, weighing instruments and other devices.

4.2 Motion Control

Hardware foundation: The ST series (transistor output) supports high-speed pulses, with ST20 having 2 channels of 100kHz and ST30/ST40/ST60 having 3 channels of 100kHz.

Core functions:

PWM mode: Fixed pulse period, adjustable duty cycle through program to achieve motor speed regulation and valve opening control.

PTO mode: supports multi-mode positioning (absolute/relative/manual), 4 reference point searches, 32 sets of motion envelopes (16 speed levels per set), and is compatible with stepper/servo motors.

Configuration tool: STEP 7-Micro/WIN SMART motion control wizard, which can quickly generate control instructions and support real-time status monitoring (speed, position, I/O status).

4.3 Convenient operation and maintenance