Eaton XV-440-10TVB-1-20 Human Machine Interface (HMI)

Eaton XV-440-10TVB-1-20 Human Machine Interface (HMI)

Core positioning and basic information of the product

Eaton XV-440-10TVB-1-20 (catalog number 139906) is a 10.4-inch human-machine interface (HMI-PLC) with integrated PLC functionality in the Eaton XV400 series, positioned as an "operation control+data interaction" terminal in industrial automation scenarios. It combines visual monitoring and logical control capabilities, and can directly communicate with on-site devices such as sensors, drivers, and PLCs to achieve equipment status display, parameter settings, fault alarms, and simple logical control. It is suitable for manufacturing production lines, mechanical equipment control, process automation, and other scenarios.

This product should pay attention to the * * "Non New Application Recommendation" * * label, which is more suitable for upgrading or replacing existing systems, rather than the preferred model for brand new projects.

Core hardware and display specifications

（1） Display and Touch Configuration

Category specific parameter description

Display screen type: 10.4-inch TFT color LCD screen with a diagonal of 10.4 inches, supporting portrait installation, suitable for different control cabinet layouts

VGA resolution (640 × 480 pixels) meets the clear display requirements of equipment status, parameters, and curves in industrial scenes

Color and contrast can be adjusted to 65536 or 256 colors, with a contrast ratio of 350:1 for high color richness. The 350:1 contrast ratio ensures visibility in strong light or industrial environments

Brightness and backlight of 350 cd/m ², moderate brightness of LED backlight (software adjustable), LED backlight lifespan of up to 50000 hours, reducing maintenance costs in the later stage

Touch technology infrared (IR) touch, coupled with anti reflective laminated safety glass, has sensitive touch response. The anti reflective glass is suitable for strong light environments in the workshop, and the safety glass enhances impact resistance

（2） Core hardware parameters

Category specific parameter description

32-bit RISC CPU with a main frequency of 400 MHz ensures smooth switching of HMI interface and efficient operation of PLC logic

Memory Configuration - Internal DRAM: 64 MB (for operating system, programs, and data)

-Flash storage: approximately 1.5 MB (data backup)

-NVRAM: Approximately 32 KB (critical data is retained during power outages). The memory combination balances running speed and data security, and NVRAM ensures that parameters are not lost after power outages

External storage requires 2 CompactFlash (CF) card slots (supporting Type I/II) to be used in conjunction with CF cards for installing operating systems, storing applications, and historical data

Heat dissipation and power consumption - Power consumption: rated 14 W, maximum 32 W

-Heat dissipation: 32 W (control cabinet heat dissipation design needs to be considered) Low power design, but if communication modules or USB devices are installed, additional heat dissipation space needs to be reserved

Physical specifications - Weight: 4.1 kg

-Protection level: IP65 on the front (dustproof and waterproof), IP20 on the back (to be installed inside the control cabinet)

-Installation method: flush mounting, front four hole fixed IP65 front protection suitable for industrial dust and oil environments, embedded installation saves control cabinet space

Communication interface and protocol support

（1） Built in interface (standard)

Number and specifications of interface types, functional purposes

One 100Base TX/10Base-T Ethernet interface is used to connect to an upper computer (such as a computer), PLC, or industrial Ethernet network for remote data transmission and monitoring

RS-232 1 (9-pin SUB-D plug, non isolated) connected to serial devices (such as printers, barcode scanners, old-fashioned PLCs)

One CAN bus (9-pin SUB-D plug, globally isolated) supports CAN/EasyNet protocol and connects CAN bus devices (such as drivers and sensors). The isolation design enhances anti-interference performance

USB -1 USB 2.0 host interface (non isolated)

-One USB 1.1 device interface (non isolated) host interface can be connected to a USB flash drive (data export), mouse/keyboard (auxiliary operation); The device interface is used for communication with a computer (program download)

Expansion slots with 2 communication module slots (optional plugins) can be equipped with dedicated communication modules such as PROFIBUS and DeviceNet according to needs, expanding compatibility

（2） Supported industrial protocols

This product supports multiple mainstream industrial protocols through hardware interfaces and software configurations, ensuring compatibility with devices of different brands. The core protocols include:

Ethernet protocols: TCP/IP, EtherNet/IP

Bus protocols: CAN, PROFIBUS, DeviceNet, KNX, MODBUS

Serial protocol: Standard serial protocol corresponding to RS-232 (such as ASCII, RTU)

Note: Some agreements require the installation of communication modules or the purchase of corresponding software licenses.

Software and Function Configuration

（1） Operating System and Programming Software