Advantest R3767CG Network Analyzer
Advantest R3767CG Network Analyzer
INTRODUCTION
Vector Network Analyzers in the R3765CG/3767CG propose a new RF circuit analysis procedure. Range of measurement frequency is 300 kHz to 3.8 GHz (R3765CG) or 300 kHz to 8 GHz (R3767CG). A unique high-speed signal processing technology adopted to the R3765CG/3767CG has realized enhanced measuring speed. The R3765CG/3767CG are a model with a built-in S parameter test set to deal with forward/reverse directions measurements. Further, lined up, as optional, are a model with a built-in 3- port test set and a model with a built-in 4-port test set. Additional installation of input channels to the receptor assembly of these multi-port models will make them capable of performing simultaneous measurement of 2 different paths to be tested. Adopting this method will result in substantial improvement to measuring efficiency of multi-port devices.
FEATURES
High-speed, High-accuracy Measurements
•150 µs/point (with 2-port Full Calibration)
•3-port or 4-port full calibration
•High-speed data transfer late
•Extended resolutions (10 Hz to 20 kHz) set by IF RBW
Wide View Multi Screen
•Uses 8.4-inch TFT color LC monitor
•Enhanced visibility to waveforms
•Varieties of displaying layouts
Extended Analysis Functions
•New system, built-in 3-port test set
•4-channel independent paths displaying function
•CDMA IF filter analysis
•Time domain analysis
Superior Operability
•Verification
•Limit-line function
•Automatic calibration
PC Friendly
•Built-in BASIC Controller
•Built-in programming editor
•Varieties of interfaces for external devices
Software Fixture
•Impedance conversion function
•Matching networking function
•Port conversion function
•Balance parameter measurement function
•Data storage function
Main Features
Multi-function display: with 4-channel and 8-trace display function, it can display multiple measurement parameters at the same time, which is convenient for users to analyse and compare data.
Wide Dynamic Range: Provides a wide dynamic range of 100dB, suitable for signal measurements in various amplitude ranges.
Standard Procedure Scanning Function: Supports standard procedure scanning for different RBW (resolution bandwidth) and output levels in scanning to meet the needs of complex test scenarios.
Multi-port Device Measurement: Supports multi-port device measurement with built-in 3-port or 4-port test fixtures (option), which is convenient for users to test and analyse multi-port networks.
Software fixture and impedance conversion: Provide software fixture, impedance conversion and other options to meet the needs of different test scenarios.
Technical Specification
Measurement Performance:
Scanning channels: 2 channels (CH1, CH2)
Display channels: 4 channels (CH1, CH2, CH3, CH4)
Tracks: 2 tracks/channel (8-trace display)
Measurement parameters: including S-parameters (e.g. S11, S21, S12, S22, etc.) and impedance (Z), conductance (Y) and other calculation parameters.
email:1583694102@qq.com
wang@kongjiangauto.com