Basler Electric DECS100‑B15 Automatic Voltage Regulator

The Basler Electric DECS100‑B15 is a digital automatic voltage regulator (AVR) designed for synchronous generators in utility, industrial, and marine applications. It provides precise voltage regulation, reactive power control, and comprehensive protection for generators of all sizes. The DECS100‑B15 features a powerful microprocessor that enables advanced control algorithms, flexible communication, and user‑friendly configuration. Its robust design ensures reliable operation in harsh electrical environments.

Control and Regulation

The regulator employs a PID control with adaptive gain for optimal transient and steady‑state performance. Voltage setpoint is adjustable over a wide range, and the unit supports both droop and isochronous operation for parallel applications. The DECS100‑B15 includes a built‑in power system stabilizer (PSS) to damp low‑frequency oscillations. It also offers reactive power (Q) and power factor (PF) control modes, allowing flexible system integration. A soft‑start function provides smooth voltage build‑up during generator start‑up.

Excitation Output

Output voltage: 0‑150 VDC or 0‑300 VDC (depending on model), with continuous current capacity up to 15 A (peak higher). The output is protected against short circuits and overcurrent. The regulator includes a field flashing circuit for initial excitation and a field over‑excitation limiter to prevent rotor overheating. A field current monitor output is available for external metering.

Communication and Programming

The DECS100‑B15 features a front‑panel LCD display and keypad for local programming and monitoring. It supports communication protocols such as Modbus RTU, Modbus TCP, and DNP3 via RS‑232, RS‑485, and Ethernet ports. Configuration software (BestCOMS) allows intuitive parameter setting, trending, and event logging. The regulator stores settings in non‑volatile memory with battery‑backed real‑time clock for time‑stamped events.

Protection and Diagnostics

Integrated protection includes loss of sensing, over/under excitation, over/under voltage, over/under frequency, and thermal monitoring. The unit provides alarm and trip outputs, and a self‑diagnostic routine checks internal hardware and firmware integrity. LEDs indicate status and fault conditions for rapid troubleshooting.

Technical Specifications

Sensing input: 100‑480 VAC, 50/60 Hz, three‑phase. Accuracy: ±0.25%. Response time:<30 ms. Power supply: 24‑250 VDC or 120‑240 VAC. Operating temperature: –25°C to +65°C. Enclosure: IP20, panel‑mount. Compliance with IEEE 421.5, IEC 60255, and CE standards.

Applications

This regulator is used on diesel, gas, and hydro generators from 200 kVA to over 10 MVA. It is ideal for power plants, cogeneration, wind farms, and marine vessels where precise voltage and reactive power control are required. Its advanced communication enables integration into SCADA and plant automation systems.

Installation and Commissioning

Mount the unit in a clean, ventilated panel. Connect sensing leads, field output, and communication cables. Commissioning involves setting parameters via the keypad or software, then performing step‑load tests to verify performance. The regulator includes a test mode for excitation verification.

Reliability and Quality

Basler Electric’s DECS100‑B15 is built with high‑quality components and undergoes rigorous testing for temperature, vibration, and EMI/EMC. It has a MTBF exceeding 100,000 hours and is backed by Basler’s global technical support.

Conclusion

The Basler Electric DECS100‑B15 automatic voltage regulator offers advanced digital control, flexibility, and reliability for demanding generator applications. Its comprehensive features and robust construction make it a preferred choice for modern power generation systems.

ABB REF 601BE446BC1NH 

KEBA CP053/Y

KEBA OP350-LD/E-6006

ABB NGC8206 

ABB 5SDA24F2303

ABB 3BHE006412R0101 UFC762AE101

ABB 3KXF002317U0300  

Reliance P56H5047G

ABB PM864AK01 3BSE018161R1

BENDER B980305 

BENDER PSA3165 

ABB PM864AK01 3BSE018161R1  

ABB PM864AK02  3BSE018164R1

GE B86434-81  

GE B86418-51

KONGSBERG WCC 600 BUZZER 1819

SAMSUNG SPDI-24   

SAMSUNG RSPC X32   

SAMSUNG SPDRO-16 

ABB REX615810GN+ADD2+AIMS+AIM6+APP1+APP3+APP5+APP9+BI05+CMP2+COM11+HMI1+PCL3+PSM4+RTD3+SCT1 

HIMA F3237

ABB F25-A000-0577 

GE IS220PDIOH1B 

GE 151X1235BC01SA01  

ALSTOM7411- 029.069 650 

ALSTOM 7334- 029.139 692