Bosch Rexroth R900086160 PGF1-2X/2.2RE01VU2 Gear Pump
Product Overview
The Bosch Rexroth R900086160 is a PGF1-2X/2.2RE01VU2 internal gear pump designed for hydraulic systems requiring a fixed displacement pumping element. It belongs to the PGF internal gear pump family and is intended for industrial and mobile hydraulic applications operating in open-circuit configurations.
Hydraulic pumps convert mechanical input power into hydraulic energy by moving fluid through a pressurised circuit. Their performance influences actuator movement, system response and the overall operating characteristics of hydraulic machinery.
The PGF1 pump uses an internal gear design that provides a compact pumping arrangement. Its configuration is intended to support hydraulic fluid delivery with controlled displacement and reduced flow pulsation compared with certain conventional gear pump arrangements.
Internal Gear Pump Technology
An internal gear pump consists of an internally toothed gear and a smaller external gear arranged within a housing. The gears rotate together, creating changing chamber volumes that transport hydraulic fluid from the inlet side to the outlet side.
As the gears rotate, fluid enters the expanding chambers and is carried around the pumping element. When the chamber volume decreases, the fluid is displaced toward the pressure outlet.
The PGF design uses a tooth arrangement intended to provide a relatively long meshing contact length. This contributes to reduced flow and pressure pulsation, helping support smooth hydraulic operation and lower operating noise.
Internal gear technology is useful in hydraulic systems where compact dimensions and controlled fluid delivery are important design considerations.
Fixed Displacement Configuration
The PGF1-2X/2.2RE01VU2 is a fixed displacement pump with a nominal displacement size of 2.2 cubic centimetres per revolution. Its output flow is related to the rotational speed and volumetric efficiency of the pump.
Because the displacement is fixed, the theoretical volume delivered per shaft revolution remains constant. Actual flow depends on operating speed, pressure, hydraulic fluid properties and internal leakage conditions.
This arrangement is suitable for hydraulic systems where flow is controlled through the selected drive speed or other circuit components rather than by varying the pump displacement.
Construction and Materials
The PGF pump uses a compact housing arrangement designed to accommodate the internal gear assembly and associated bearing and sealing components.
The housing and bearing covers use aluminium alloy construction. The internal gear and pinion shaft are made from steel, while the plain bearing arrangement and support components use materials selected for the intended hydraulic operating conditions.
The pump configuration includes FKM sealing materials. Seal compatibility is important because hydraulic fluid type, temperature and operating pressure influence the performance and service life of the sealing system.
Correct selection of hydraulic fluid and maintenance of fluid cleanliness are essential for protecting internal components and maintaining the intended operating characteristics.
Shaft and Mounting Configuration
The R900086160 configuration uses a cylindrical shaft with a fitting key and a through-drive arrangement. The shaft specification follows the applicable ISO 3019-2 dimensional requirements.
The mounting arrangement uses a two-hole flange according to ISO 3019-1. This provides the mechanical interface required to connect the pump to a compatible drive source or mounting assembly.
The shaft alignment and coupling arrangement should be checked during installation. Incorrect alignment or excessive external shaft loading can affect bearing conditions and pump service life.
Hydraulic Connections and Fluid Compatibility
The pump uses G1/4 suction and pressure connections for the identified 2.2 displacement configuration. Correct connection of the inlet and outlet ports is essential for proper hydraulic operation.
The PGF pump family supports specified hydraulic fluid categories, including HL, HLP, HEES and HEPR fluids, subject to the applicable operating requirements. Fluid selection should consider viscosity, temperature, lubrication properties and material compatibility.
Inlet conditions are particularly important for hydraulic pump performance. Insufficient inlet pressure, excessive fluid viscosity or restricted suction lines can cause cavitation and abnormal noise.
The hydraulic circuit should therefore be designed to maintain suitable inlet conditions and prevent contamination from entering the pump.
Pressure and Flow Characteristics
The PGF1 family is designed for medium-pressure hydraulic applications. The product family documentation identifies a maximum intermittent pressure capability of up to 250 bar for applicable configurations. The actual permitted pressure depends on the selected pump size, operating conditions and duty cycle.
For the 2.2 size configuration, the theoretical flow rate depends on shaft speed. At a given rotational speed, the delivered flow will be affected by the volumetric efficiency and hydraulic operating conditions.
Engineers should distinguish between continuous operating pressure and short-duration intermittent pressure. The maximum pressure rating must not be interpreted as a continuous operating value for every application.
Industrial Applications
The Bosch Rexroth PGF1 internal gear pump is suitable for compatible hydraulic circuits in industrial and mobile equipment. Typical applications include machine tools, industrial power units, hydraulic processing machinery and selected mobile hydraulic systems.
In machine tools, hydraulic pumps supply fluid for clamping mechanisms, auxiliary movements and other hydraulic functions. Stable fluid delivery contributes to consistent machine operation.
Industrial hydraulic power units use pumps to provide the flow required by cylinders, motors and other hydraulic actuators. A fixed displacement internal gear pump can be integrated into circuits where flow requirements are defined by the system design.
Mobile machinery can also use internal gear pumps in hydraulic subsystems where compact construction and suitable pressure characteristics are required.
Installation and System Design
Before installation, the pump identification, displacement, shaft arrangement, mounting flange and port configuration should be checked against the machine requirements.
The drive source must provide an appropriate rotational speed and direction. Coupling alignment and mounting rigidity should be verified to avoid unnecessary mechanical loads.
The hydraulic circuit should include suitable filtration, fluid reservoir capacity and inlet pipe dimensions. Initial start-up procedures should ensure that the pump is correctly filled and that air is removed from the circuit where required.
Maintenance and Troubleshooting
Routine maintenance should include checking hydraulic fluid condition, filter contamination, operating temperature and unusual noise. A change in pump noise or delivery performance may indicate air entering the suction circuit, contamination or abnormal mechanical conditions.
Fluid cleanliness is especially important for internal gear pumps because contaminants can damage precision working surfaces and affect internal clearances.
Maintenance personnel should also inspect the shaft coupling, mounting fasteners, port connections and external seals. Hydraulic leakage should be investigated promptly to prevent further equipment problems.
Conclusion
The Bosch Rexroth R900086160 PGF1-2X/2.2RE01VU2 is a fixed displacement internal gear pump designed for compatible open-circuit hydraulic systems. Its 2.2 displacement configuration, keyed cylindrical shaft, through-drive arrangement and FKM sealing system are important selection characteristics.
Correct hydraulic fluid selection, inlet conditions, mechanical alignment and pressure management are essential for reliable operation. Understanding the complete pump designation helps engineers integrate the appropriate component into industrial and mobile hydraulic applications.




