Mannesmann Rexroth VT3006-36 Analog Amplifier Card
Product Introduction
The Mannesmann Rexroth VT3006-36 is an analogue amplifier card designed for electronic control of proportional hydraulic valves. It belongs to the VT3006 amplifier family and provides signal processing and current regulation functions for compatible proportional directional and pressure control valves.
Hydraulic proportional valves allow the flow direction, pressure or other hydraulic operating characteristics to be influenced through an electrical command signal. To achieve controlled valve operation, the electrical command must be processed and converted into an appropriate solenoid current.
The VT3006 amplifier performs this function by processing command values, generating controlled signal transitions and regulating the output current supplied to the valve solenoids. It is designed for industrial hydraulic control applications that require adjustable operating characteristics and coordinated electrical control.
Proportional Valve Control Technology
Proportional hydraulic valves use electrically controlled solenoids to influence the position of an internal valve element. The resulting hydraulic response depends on the solenoid current and the mechanical characteristics of the valve.
An electronic amplifier is used to convert the machine controller's command signal into the current required by the valve. The amplifier must provide suitable signal conditioning and output regulation to support the intended hydraulic response.
The VT3006 is designed for compatible pilot-operated proportional directional valves of the WRZ type and selected directly operated proportional pressure valves, including DBEP6 and 3DREP6 configurations identified in the product documentation.
These valve applications use electrical command values to influence hydraulic operation. The amplifier helps establish a controlled relationship between the electrical input and the valve's solenoid current.
Command Value Processing
One of the main functions of the VT3006 amplifier is command value processing. The card provides four adjustable command values that can be configured using onboard potentiometers.
These command values allow the hydraulic system to use different predefined operating levels. Depending on the machine design, individual settings can represent different movement speeds, operating pressures or hydraulic response conditions.
The amplifier also provides four command value selection functions with corresponding LED indication. These indicators help maintenance personnel identify which command value selection is currently active.
Command value adjustment should be carried out according to the hydraulic system design. Settings must be verified against the requirements of the connected valve and the complete machine application.
Differential Input Function
The VT3006 includes a differential command input. This arrangement allows the amplifier to process a differential electrical signal rather than relying exclusively on a single-ended command voltage.
Differential signal processing can be useful in industrial control systems where signal transmission and reference potential management are important considerations.
When using the differential input, the input connections must follow the specified switching and electrical requirements. Both inputs must be operated in accordance with the manufacturer's instructions to avoid incorrect signal interpretation.
Ramp Generator and Step Function Generator
Controlled hydraulic movement often requires a gradual change in valve command rather than an immediate transition from one operating level to another. Sudden changes can produce undesirable pressure variations, mechanical shock or unstable machine movement.
The VT3006 includes a ramp generator with five selectable ramp time settings. This function controls how quickly the command signal changes between operating levels.
Ramp generation is useful for applications requiring controlled acceleration and deceleration of hydraulic actuators. By adjusting the ramp response, the machine designer can influence how quickly the hydraulic system responds to a new command.
The amplifier also incorporates a step function generator. This function provides an additional signal component intended to help overcome the valve spool overlap region during changes in command direction.
The combined operation of the ramp and step functions supports controlled valve response while addressing the mechanical characteristics of proportional valve operation.
Dual Solenoid Current Output
The VT3006 provides two pulsed current output stages for controlling the solenoids of compatible proportional directional valves.
Depending on the polarity of the command signal, the amplifier controls the corresponding solenoid output. A positive command signal controls solenoid B, while a negative command signal controls solenoid A according to the documented operating principle.
The output stages regulate current rather than relying only on a fixed voltage supply. This is important because solenoid resistance can change with temperature, affecting the relationship between applied voltage and current.
Current regulation helps maintain the intended electrical control behaviour under changing operating conditions. The specified output current, solenoid resistance and operating limits must be respected when selecting the connected valve.
Monitoring and Diagnostic Indicators
The VT3006 includes several LED indicators that provide information about the operating condition of the amplifier and the selected command functions.
The H11 indicator is associated with the power supply status, while H12 indicates readiness for operation. Other LED indicators show the active command value selection.
The amplifier also provides measuring points for checking current-related signals. These points can assist maintenance personnel during commissioning and troubleshooting.
If an internal supply problem or short circuit in the solenoid wiring is detected, the output stages are de-energised and the ready indication is cancelled. After the fault has been corrected, normal operation can resume according to the specified operating conditions.
Electrical Supply and Installation Format
The VT3006 operates from a nominal 24 V DC supply. Its specified operating range and electrical limits should be checked before integration into an existing control cabinet.
The amplifier is designed in an industrial Eurocard format with a 32-pin terminal strip connection. Its front panel uses a standardised rack arrangement for installation in a compatible card holder.
The corresponding card holder is identified as VT3002-2X/32. The power supply arrangement must also be suitable for the amplifier's electrical requirements.
Correct wiring is essential for reliable operation. Command value lines should be appropriately screened, and signal wiring should be routed away from sources of electrical interference where possible.
Industrial Applications
The VT3006-36 is suitable for compatible industrial hydraulic control installations using proportional valves. Typical application environments include machine tools, hydraulic power units, industrial presses, material handling equipment and automated production machinery.
In machine tools, proportional valve amplifiers can control hydraulic movements used for clamping, positioning and auxiliary operations. Adjustable command values allow the machine designer to configure different operating conditions.
Industrial presses may use proportional hydraulic control to manage movement and pressure-related functions. Controlled command transitions can help coordinate hydraulic response with the machine operating sequence.
Material handling equipment frequently uses hydraulic actuators for lifting and positioning. Proportional valve control allows electrical commands to influence the hydraulic movement characteristics.
Compatibility and Configuration
Before selecting the VT3006-36, engineers should verify the complete product designation, amplifier series and compatibility with the intended proportional valve.
The card is designed for specified valve families and should not be assumed to support every proportional valve. Solenoid resistance, current requirements, command input characteristics and valve configuration must be checked.
The amplifier also requires a compatible card holder and suitable power supply. The electrical wiring and signal reference arrangement must follow the applicable technical requirements.
Installation and Maintenance
The amplifier card should only be inserted or removed when the system is switched off and made safe. Handling should follow appropriate electrostatic discharge precautions for electronic components.
During installation, technicians should check the card holder, terminal connections, command signal wiring and solenoid output connections. Incorrect wiring can cause abnormal operation or prevent the amplifier from entering its ready state.
Maintenance inspections should include reviewing LED indicators, checking command value settings and measuring the relevant electrical signals. Any short circuit or abnormal output condition should be corrected before the hydraulic system is returned to operation.
When performing electrical measurements, technicians should use suitable instruments and follow the specified measuring procedures. Special attention should be given to the measuring zero reference, which must not be treated as directly equivalent to the power supply zero.
Conclusion
The Mannesmann Rexroth VT3006-36 is an analogue amplifier card developed for proportional hydraulic valve control. Its command value adjustment, differential input, ramp generator, step function generator and dual current output stages provide the signal processing functions required by compatible hydraulic applications.
Its diagnostic indicators and current measuring points also support commissioning and maintenance activities. Correct valve matching, electrical installation and command configuration are essential for reliable hydraulic control.
For industrial automation engineers and hydraulic system specialists, understanding the VT3006 amplifier's operating principle helps support accurate component selection and effective integration into proportional valve control systems.




