IS200BAIAH1B | General Electric Bridge Application Interface Board

IS200BAIAH1B | General Electric Bridge Application Interface Board

Product Description P/N: THQB2130 DESCRIPTION / SPECIFICATIONS Description The THQB2130 is a circuit breaker manufactured by General Electric, belonging to the THQB type. It operates with 2 poles in single-phase systems, rated at 30A and 240V. With an interrupting capacity of 10kA at 240V and a temperature rating of 40C, it ensures effective circuit interruption under specified conditions. The circuit breaker is UL listed, indicating compliance with safety standards. Utilizing Bolt-On mounting, the THQB2130 employs Thermal Magnetic technology and features Long-Time and Instantaneous trip functions. 

Additionally, it is equipped with load side lug terminals for secure electrical connections. This molded case circuit breaker is designed to offer reliable circuit protection in various electrical applications. Technical Specifications Specifications Part # THQB2130 Manufacturer GENERAL ELECTRIC Category Circuit Breaker Subcategory Load Center Circuit Breaker Trip Style Non-Interchangeable Frame Type Q-Line Amperage 30 A System Voltage 120 Vac, 120/240 Vac Poles 2 Trip Function LI Continuous Current Rated Standard 120 Vac Interrupting Rating 10 KAIC 120/240 Vac Interrupting Rating 10 KAIC Suitable for Reverse Feed Yes Wire Range (Cu/Al) 14-8 kcmil / 12-8 kcmil Long Time Fixed Instantaneous Fixed Protective Relays No Current Metering No Special Markings HACR GSA Compliance Yes Information About THQB2130 The THQB2130 is a circuit breaker manufactured by General Electric, designated as type THQB. It operates with 2 poles in single-phase systems, with a current rating of 30A and a voltage rating of 240V. With an interrupting capacity of 10kA at 240V and a maximum operating temperature of 40C, it ensures effective circuit interruption within specified conditions. This circuit breaker is UL listed, indicating its compliance with safety standards and regulations. 

It utilizes Bolt-On mounting for secure installation. Employing Thermal Magnetic technology, it incorporates Long-Time and Instantaneous trip functions, enhancing its ability to respond to electrical abnormalities promptly. Additionally, it features load side lug terminals, facilitating secure electrical connections. The THQB2130 serves as a molded case circuit breaker, offering reliable circuit protection in various electrical applications. Its design and specifications make it suitable for use in residential, commercial, and industrial settings where circuit protection is paramount. Manufacturer information General Electric (GE)is a multinational conglomerate founded in 1892, based in the United States. It operates in various industries, including aviation, healthcare, renewable energy, and power. 

GE is known for its innovations in technology, manufacturing, and infrastructure solutions. IQElectro is not an authorized distributor. QElectro LLC (IQElectro) is NOT an Authorized Distributor or in any way affiliated with Rockwell Automation, Siemens, or any other Manufacturers. IQElectro is NOT an Authorized Dealer of this product. The product may be of older version, date codes, or design than that available from authorized dealers. As IQElectro is not an authorized dealer of this product, the Original Manufacturer's Warranty and Support DO NOT apply.IQElectro sells SURPLUS onlyand DOES NOT SELL SOFTWARE or FIRMWARE licenses For more detailed information, please refer to the full version of our disclaimer policy Disclaimer Policy.

OTHER INFORMATION

• Available with either the 1.1 GHz, 1.6 GHz or 1.8 GHz  Pentium® M processor  

• 1.4 GHz Pentium M processor coming soon  

• Up to 2 Mbyte of advanced L2 cache  

• Up to 1.5 Gbyte DDR SDRAM  

• Up to 2 Gbyte bootable CompactFlash on secondary IDE (see  ordering options)  

• Internal SVGA and DVI controller  

• Serial ATA support through P2 rear I/O  

• 400 MHz system bus via Intel® 855GME chipset  

• Ethernet controller supporting 10BaseT and 100BaseTX  through the front panel  

• Gigabit Ethernet controller supporting 10BaseT, 100BaseTX  and 1000BaseT interface with optional VITA 31.1 support  

• Four asynchronous 16550 compatible serial ports  

• Four Universal Serial Bus (USB) Rev. 2.0 connections, two on  the front panel and two rear I/O  

• PMC expansion site (PCI-X, 66 MHz)  

• 32 Kbyte of nonvolatile SRAM  

• Operating system support for Windows® XP, Windows 2000,  VxWorks®, QNX® , LynxOS® and Linux