GE IS200JGNDG1A Shield Ground Terminal Board

GE IS200JGNDG1A Shield Ground Terminal Board

Part Number IS200JGNDG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS200JGNDG1A is a Shield Ground Board manufactured and designed by General Electric as part of the Mark VI Series used in gas turbine control systems. The JGND board mounts next to the terminal board and offers easy ground connections for the customer's shield drain wires. INSTALLATION: JGND is mounted on a bracket made of sheet metal that is fastened to the plate holding the terminal board. With the two screws at each end of the terminal board, JGND is grounded to the bracket. Shield wires belonging to the customer are connected to terminals in the Euro-type terminal block. 

For a total of 48 ground connections, one or two JGND connectors can be placed on the side of the terminal board mounting bracket. At the positions of the board mounting screws, JGND offers a route to the sheet metal ground. A nylon washer is included in the standard mechanical assembly of this board to its mount between the board and the sheet metal. As a result, JGND is separated from the sheet metal, enabling the board ground current to be wired into any desired grounding position. It is possible to channel ground currents into nearby sheet metal by removing the washer, which eliminates the need for extra grounding leads. 

When installing a JGND board, a decision must be made regarding whether to transmit ground currents directly to sheet metal or through a wire to a designated ground. OPERATION: The two grounding screws at the ends of JGND link all 24 connectors on the Euro block to the ground. These establish contact with the ground-connected metal mounting bracket. The board can be isolated using nylon washers, and ground currents can then be connected to any desired system position. DIAGNOSTICS: No diagnostics signals are obtained from the JGND Board CONFIGURATION: There are no jumpers or switches on JGNDGROUND TERMINATION CARD (*12).

SPECIFICATIONS

Part No.: IS200JGNDG1A
Manufacturer: General Electric
Country of Manufacture: United States of America (USA)
Terminals: 24
Temperature: -30 to +65oC
Size: 3.175 cm high x 12.7 cm wide
Mounting: Held with three screws
Product Type: Shield Ground Terminal Board
Availability: In Stock
Series: Mark VIe

Ease of Use

• Simple and powerful instruction set 

• One-axis or two-axis motion programs with synchronized block start 

• Program support for a short motion program (called Program Zero) which can be created in the MS-DOS programming software configuration function 

• Nonvolatile (flash) storage for 10 programs and 40 subroutines 

• User scaling of programming units (in Standard mode only) 

• Generic programming using command parameters as operands for Acceleration, Velocity, Move and Dwell commands 

• Configured with MS-DOS configuration software 

Technical features

Programmability: Users can program and customise the module according to specific application requirements to achieve precise control of industrial processes and improve productivity and product quality.

Integration and compatibility: The module can be seamlessly integrated with other ABB products and solutions to form a unified automation platform. It also has excellent compatibility with other manufacturers' equipment and systems.

High performance and reliability: High-performance hardware and software are used to ensure stable operation and efficient control in industrial environments. With advanced fault detection and diagnostic functions, potential problems can be detected and dealt with in a timely manner, improving the reliability of the system.

Flexibility and expandability: with modular design, it can be flexibly configured and expanded according to actual needs. Whether it is a small or large project, it can be easily integrated into the existing automation system.

Easy to use and maintain: Provides an intuitive user interface and powerful diagnostic tools, enabling users to operate and maintain with ease.