Product Overview
The National Instruments BNC-2090A is a BNC terminal block for 68 pin data acquisition devices. It provides BNC connections for analog input, analog output, and trigger signals, allowing coaxial cables to be connected directly to the DAQ system. The block is used in laboratories, test benches, and industrial applications where BNC connections are preferred for signal integrity and convenience.
The BNC-2090A is part of the NI accessory family for data acquisition. It is commonly used with M Series, E Series, and other DAQ devices that use 68 pin connectors. The shielded enclosure helps reduce electromagnetic interference on low level signals.
BNC Connections
The terminal block provides BNC connectors for the analog input and output channels of the connected DAQ device. BNC connectors are widely used in test and measurement because they provide a secure, shielded connection that is easy to attach and remove. Engineers should confirm the channel mapping and connector arrangement for the specific DAQ device and terminal block configuration.
Coaxial cables should be selected to match the signal frequency and impedance requirements of the application. For low frequency signals, general purpose shielded BNC cables are usually sufficient. For higher frequency signals, cable quality and termination become more important.
Shielding and Signal Integrity
The shielded enclosure and BNC connectors help protect signals from electromagnetic interference. This is particularly important for low level analog measurements, where noise pickup can degrade accuracy. Engineers should connect the shield according to the documentation and should avoid ground loops when routing cables.
Signal cables should be separated from power conductors and routed away from high current switching equipment. These practices help maintain measurement quality in electrically noisy environments.
Compatibility and Installation
The BNC-2090A is compatible with specific NI DAQ devices that use 68 pin connectors. Engineers should confirm the supported devices and cable types before using the block. The block connects to the DAQ device through a shielded cable, which should be routed to avoid strain and interference.
The block should be placed on a stable surface with access for cable connections and inspection. Engineers should verify that the assembly is secure and that cables are not under tension. Regular inspection of connectors and cables helps maintain reliable connections.
Software and System Integration
The BNC-2090A does not require separate software; it works with the connected DAQ device through the device driver. Engineers configure channels and measurement functions through NI-DAQmx and the application software, and the terminal block simply provides the physical connection interface.
Documentation of the channel mapping and cable arrangement supports maintenance and replication. When the system is duplicated on additional stations, the same terminal block and cabling arrangement helps ensure consistent results.
Typical Applications
Analog input and output connection with BNC cables
Laboratory measurement and signal analysis
Bench top test setups with shielded signals
Trigger and clock signal distribution
Sensor and signal generator connection
DAQ systems requiring quick connect and disconnect
The BNC-2090A provides a shielded BNC terminal block for 68 pin DAQ devices. Its BNC connections and shielding make it a practical accessory for laboratory and bench top measurement systems.




