Product Overview
The National Instruments PXIe-7858R is a reconfigurable I/O module for PXI Express systems. It belongs to the NI R Series family and combines a Kintex-7 FPGA with high speed analog and digital I/O. The module is designed for applications that require custom hardware logic, deterministic timing, and flexible I/O in a PXI Express chassis.
The PXIe-7858R is used in real time control, high speed signal processing, custom protocol implementation, and research applications. Because the FPGA is user programmable, engineers can define custom I/O behavior and processing functions that are not available in fixed function instruments.
FPGA and Processing Resources
The Kintex-7 FPGA provides substantial logic resources for custom designs. Engineers can implement control loops, signal filters, protocol handlers, and data reduction functions in hardware. This allows the module to respond with deterministic timing and to process data before it reaches the host computer.
LabVIEW FPGA is used to develop logic for the module. Designs are compiled to the FPGA and run at hardware speed, allowing microsecond level response and precise I/O timing. Engineers should confirm the supported FPGA development tools and software versions for the specific module configuration.
Analog and Digital I/O
The module provides high speed analog input and output channels along with digital I/O lines. The exact channel count, resolution, and sampling rate should be confirmed against the product documentation for the specific module variant. The I/O is connected directly to the FPGA, allowing custom timing and processing for each channel.
Analog input and output channels can be used for sensor measurement and actuator control, while digital lines support custom protocols, triggers, and status monitoring. Engineers should verify the input and output ranges and the electrical characteristics of the connected devices.
PXI Express Integration
The PXIe-7858R installs in a compatible PXI Express chassis and communicates with the controller over the backplane. The module can be synchronized with other PXI Express instruments through trigger lines and clocks, enabling coordinated multi instrument test sequences.
The FPGA can be used to implement custom triggering and timing that interacts with other modules in the chassis. Engineers should document the trigger routing, clock sources, and FPGA design so that the system can be reproduced and maintained.
Software and Development
The PXIe-7858R is supported by NI LabVIEW FPGA and related NI software. Engineers can develop custom logic, test it with simulation, and deploy it to the module. Host software can communicate with the FPGA through DMA and register access.
Documentation of the FPGA design, I/O configuration, and host interface supports maintenance and replication. Engineers should validate the design against the application requirements and verify performance under realistic operating conditions.
Typical Applications
Custom real time control and signal processing
High speed digital protocol implementation
Hardware in the loop test systems
Custom analog and digital I/O applications
Research and prototype development
PXI Express based advanced test systems
The PXIe-7858R provides a Kintex-7 FPGA with high speed analog and digital I/O in a PXI Express module. Its reconfigurable architecture and development tools make it suitable for custom embedded control and signal processing applications.




