The National Instruments PCI-AI16HR is an analog input board for PCI based measurement systems. The model designation indicates 16 analog input channels with high resolution conversion, and the board is used in laboratory measurement, industrial data acquisition, and general purpose analog signal monitoring.
PCI based analog input boards place the measurement interface inside the host computer, which keeps the system compact and avoids external cabling between the computer and the measurement hardware. Engineers can acquire multiple analog channels and process data in software on the host.
The board provides 16 analog input channels. Input range and sample rate should be configured to match the signal types in the application. Engineers should review the product documentation for the exact resolution, input ranges, and sampling specifications of this board, because model variants differ in conversion architecture.
For multi channel scanning, the sample rate is shared across active channels, so settling time and source impedance influence achievable accuracy. Differential wiring is generally preferred for low level signals or where ground potentials differ.
The high resolution designation indicates that the board is intended for measurements where fine amplitude detail matters, such as low level sensor outputs and precision monitoring. Engineers should select the narrowest input range consistent with the expected signal to preserve usable resolution.
Signal conditioning external to the board may be needed for very small signals or for sources with high output impedance.
The board installs in a compatible PCI slot and communicates through the PCI bus. Engineers should verify driver compatibility, slot availability, and power requirements. The computer enclosure should provide adequate cooling.
Field wiring connects through a connector or terminal assembly. Proper grounding and shielding help maintain signal quality, and high level signals should be separated from low level analog wiring.
The board is configured through the appropriate NI software and standard programming environments. Applications define channels, timing, and scaling, then acquire data. Documentation of pin assignments and channel scaling supports repeatability.
The PCI-AI16HR is suited to laboratory measurement, industrial monitoring, sensor characterization, and general purpose data acquisition. It supports multi channel analog input in a PC based system.
Installation requires a compatible PCI slot, driver installation, and connection of field wiring. Maintenance includes checking connections, verifying channel configuration, and confirming calibration.
The National Instruments PCI-AI16HR Analog Input Board provides 16 analog input channels with high resolution conversion for PCI systems. It supports laboratory measurement and industrial data acquisition. Engineers should confirm the exact specifications from the product documentation and plan wiring and scaling accordingly.



