The National Instruments PCIe-6341, part number 194986D-03L, is an X Series multifunction data acquisition device for PCI Express systems. It provides 16 analog input channels with 16 bit resolution and sampling up to 500 kS/s, 2 analog output channels, 24 digital I O lines, and counter functions. The device is used in automated test, laboratory measurement, data logging, and control applications.
The PCIe-6341 installs in a PCI Express slot of a desktop computer or industrial PC. The PCI Express interface supports high data throughput between the DAQ device and the host computer. X Series devices provide advanced timing and synchronization features that help coordinate multiple measurement and control tasks.
Analog Input
The device provides 16 analog input channels with 16 bit resolution and sampling up to 500 kS/s. Input range and sample rate can be configured for different signal types. Analog input is suitable for voltage sensors, transducer outputs, and general purpose signal measurement.
For multi channel acquisition, sample rate allocation and settling time should be considered. Differential wiring is preferred for low level signals, while single ended wiring simplifies cabling when a common reference is acceptable.
Analog Output and Digital I O
The device includes 2 analog output channels for stimulus generation and control. Twenty four digital I O lines support status monitoring, relay control, and communication with digital devices. Counter functions support event counting, pulse generation, and frequency measurement.
These functions can be synchronized with analog acquisition through the device timing engine. Engineers should plan timing and triggering for correlated measurements.
Timing and Synchronization
The PCIe-6341 supports hardware timing and triggering for coordinated acquisition and output. Engineers can use internal or external triggers to start tasks at specific events. Sample clocks can be shared across channels and functions, and timing signals can be routed to other devices.
Timing routing should be documented as part of the system design. Undocumented routing is a common source of confusing behavior when a system is modified.
Software and Driver Support
The device is designed to work with NI data acquisition software and standard programming environments. Engineers can configure channels, create tasks, set timing, and read data using supported drivers and APIs.
Software configuration includes input range, sample rate, trigger source, and data transfer method. Documentation and examples help reduce setup time.
Applications
The PCIe-6341 is suited to automated test, laboratory automation, data logging, and control system validation. It supports multi channel measurement in a PC based system.
Installation and Maintenance
Installation requires a compatible PCI Express slot, driver installation, and connection of field wiring or terminal blocks. Proper grounding and shielding help maintain signal quality.
Maintenance includes checking cable connections, verifying channel configuration, and confirming calibration. Documentation helps repeatability.
Summary
The National Instruments PCIe-6341 X Series DAQ Device provides 16 analog inputs at 500 kS/s, 2 analog outputs, 24 digital I O lines, and counters in a PCI Express form factor. It supports automated test, laboratory measurement, and data acquisition. The device is a practical choice for engineers who need a broad measurement feature set in a PC based system.




