Product Overview
The National Instruments PXIe-4154 is a battery simulator module for PXI Express systems. It provides programmable voltage and current output designed to emulate the behavior of a battery, allowing battery powered devices to be tested under controlled conditions. The module is used in design validation, production test, and research applications where repeatable power conditions are required.
The PXIe-4154 is part of the NI power supply and source measure unit product family. It combines sourcing capability with measurement functions, allowing the test system to apply voltage and current while monitoring the device response. The PXI Express form factor supports integration with other instruments in the same chassis.
Battery Simulation
Battery simulation allows a device to be tested without a physical battery, using a programmable source that can replicate the voltage and current behavior of a battery under different conditions. This makes tests repeatable and allows conditions such as low battery, charging, and transient load changes to be applied consistently.
Engineers should confirm the voltage and current ranges, accuracy, and transient response of the module for the specific battery type and device requirement. The simulator should be configured to match the expected battery behavior and to protect the device under test from overvoltage or overcurrent conditions.
Low Noise Output
Battery powered devices are often sensitive to power supply noise, so a low noise output is important for meaningful test results. The PXIe-4154 is designed to provide clean output within its specifications. Engineers should verify the noise performance for the selected voltage and current range and should use appropriate cabling and grounding to preserve output quality.
Remote sense connections can help compensate for voltage drop in the test cables, improving accuracy at the device terminals. Engineers should confirm whether remote sense is supported for the specific configuration and should connect it according to the documentation.
Measurement and Protection
The module includes voltage and current measurement, allowing the test application to verify the applied conditions and the device response. Compliance limits help protect the device under test and the module from damage due to overvoltage, overcurrent, or short circuit conditions.
Engineers should set protection limits appropriate to the device and should understand how the module responds when a limit is reached. Test fixtures should be designed to protect both the device and the instrument, and fusing or transient protection should be added where required.
PXI Express Integration
The PXIe-4154 installs in a compatible PXI Express chassis and communicates with the controller over the backplane. It can be synchronized with switches, DMMs, digitizers, and other instruments through trigger lines and timing resources. This allows a test to apply power, route signals, measure response, and evaluate results in one sequence.
The module is supported by NI instrument driver software and can be programmed with LabVIEW, LabWindows/CVI, Measurement Studio, and other compatible development environments. Engineers can configure output settings, protection limits, and measurement functions through the driver.
Typical Applications
Battery powered device design validation
Production test with repeatable battery conditions
Power consumption and current profile measurement
Charging and discharging behavior test
Low power electronics characterization
PXI Express based automated test systems
The PXIe-4154 provides a battery simulator with programmable voltage and current output and measurement functions in a PXI Express module. Its low noise output and protection features make it suitable for battery powered device test and characterization.




